@montera.built Build Thread on 37's

They're priced similarly too. I can get a 6 Trigger for around $300 tho. Thanks for the great input on the two. I only wish the Garmin wasn't solely dependent upon the app for control. By custom work to the harnesses do you mean the Garmin has no wire harness to plug into and that I'd have to run my accessory wire straight into the unit? I've wired up everything I have so far myself so I'm not opposed to electrical work.

 

Correct. You'll essentially have to wire your power to the garmin unit and then find a ground. I have my whole setup tied into a blue seas ground panel next to my garmin so I wire everything to those.

 

Cool. That's no issue. I use a negative bus bar as it is.

 

Great build so far. By the time I pick up a '24 on the factory 3" lift you will have all the custom fab stuff for the Colorado peeps dialed in... It'll be like a shopping list!

 

First 22 I’ve seen done right. Nice job

 

Haha hey that's the plan! Been working on getting stuff pushed to market asap for us!

You're too kind

 

What pods are you using for the ditch lights? Those rectangular ones?

 

They're Diode Dynamics SSC2's

 

does the Garmin app interface works with carplay i.e. pilot my lights from my big screen unit vs the small iphone screen?
I'm assuming it has relays built in ?

 

Unfortunately there’s no CarPlay compatible app. But I plan on reaching out to garmin to see if that’s something they might work on. I had the same thought I think that would be such an awesome feature.

 

Truck looks amazing! Do you have a build thread for the 4runner somewhere?

 

Thank you! I don't currently but I will likely throw something together on the 4runner forums!

 

Been waiting on a few packages and for some stuff to be built recently. In the meantime, installed these Charvonia Designs billet tie downs. Super nice quality!

 

Also got my RRW beadlocks mounted up on the wheels. Looks awesome and will be great for wheeling. Ran into some additional clearance issues once the beadlocks were mounted. Brought the tire out enough that I needed to have a body mount chop done and some more fender trimming. Clears lock to lock now!

 

Those bead locks are sweet. When do the Fox's come? I'm sure you're just loving that spacer lift haha

 

They're super nice! Couldn't be happier. And yeah the spacer lift is alright haha supposedly Fox doesn't think they'll even start working on a kit until the end of the year/beginning of 2023. I actually went with King 2.5 with adjusters and finned reservoirs... should be here in a couple months

 

Do you happen to know what the color of the wrap was called that your mustache was wrapped with?

 

I actually took the pieces off and painted them myself.

 

Dang, my parts are that bullshit crappy plastic chrome that does not paint well, options are to sand it all off and paint, or wrap it.

 

Oh yeah I luckily had that brushed silver on mine so it took to the paint nicely.

 

Been a while since I’ve posted an update but added quite a few things to the truck! First, got the Carven cat back exhaust on and oh my goodness it did not disappoint. Definitely on the louder side but it sounds amazing. I’ll work on getting a sound clip up!

Next we reworked the whole suspension. King 2.5 front and rear with adjusters, switched to Total Chaos upper control arms, and Timbren rear bump stops. Should be all finished up today so I’ll post some pics and a little review once I get some miles on it!

 

After a quite the fiasco, finally got the front and rear King Shocks on with the Total Chaos upper control arms. Long story short, my kings were affected by a bad batch of studs and ended up needing all 8 replaced. Luckily they snapped while on a lift in a controlled environment and not on the road...

Can't speak highly enough of King though. They were very quick to respond and get this issue handled for me and took great care of me.

Truck drives sooooooo much better than stock. Before, washboard roads made it feel like the truck was going to fall apart. These just eat everything up now.

 

Just wondering how your MPGs are when you were 35s and 37s compared to stock?

 

Gorgeous truck man!!

 

I drive probably 70% city if not more. I average about 15.5-16 on my tanks. Prior to that I was maybe getting 2ish MPG's better on 35's.

 

Any issues getting up to speed with 37s specially on going up hills? TIA!

 

It's slower, but this truck still has plenty of power. Especially with the JB4.

 

Did gouge your driveshift somewhere on the LCA or something? Maybe it's just the pic.

 

I think it's anti-seize from the install lol