WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

how hard would it be to use something like this to remove the bolt heads or would it even work? are the bolts hardened enough to resist or make it a long tedious task to nullify the attempt?

 

i would think it would be pretty hard with the oscillating tool, those things don't really cut metal the greatest for one, i would think as soon as you touched it to the bolt head it would make a god awful racket with the vibrations that it makes

one would assume the bolts are hardened, but i highly doubt it, looks like just a standard button head Allen bolt that's about 4 inches long on the back ones, the 2 front are shorter and screw into the frame of the truck

if i was really concerned with it, i would purchase some of the rock dome things that other people put on

 

got the windows tinted and removed the 4x4 stickers to make room for bed decal when it gets here.
20% ceramic on fronts to match rears and 70 on windshield, $400 and change, instantly noticeable difference in heat rejection, its awesome

 

looks great man… how hard was your beside sticker to remove? A pain in the ass like all the other reports?

 

I watched as the shop took my bedside decals off and it literally took like 90 seconds with a heat gun.

 

that is the worst damn sticker ever, i put a couple good scratches in mine, but i was being impatient and wanted it done as it was hot as hell yesterday
im sure heat gun/ blow dryer and taking time would have made it come up just slightly easier

 

Coming along nicely.
1.75” RC level
Windows 30% tint
Red Tundra bumper decal and under light bars.
Hood decal
Toyota bedcover
Katzkin leather seats
Toyo Open Country AT3 275/65/20
Carven cut and clamp exhaust (video clip not attaching for some reason. Working in that).

 

Mine is still technically in production but so far, I’ve obtained/scheduled:

• Method 305s with custom TRD center caps and 315/70R17 BFG K02s (carry over from my Taco)
• 40” BD S8 lightbar
• BD Squadron Pro ditch lights
• Xpel Stealth PPF wrap
• “Mystery” roof rack from very reputable company (coming soon. Still being prototyped)
• Mid-height bed rack from same company
• R4T rock lights
• Few minor interior updates including black steering wheel cover badge, “TRD START STOP” push-to-start button (looks better than OEM IMO)
• Replacement key fobs (red with black screws)
• Carryover overlanding gear from my taco (MaxTrax, pelicans, rotopax, recovery equipment, camping equipment, bike racks, etc)

Super stoked for this build.

(pics of aforementioned parts when they were installed on my taco)

 

Using the Rock Dome bolt head protectors are the way to go.

 

Your truck looks great, dude!

 

Put Toyo Open Country M/T 35 12.5R18s on the OEM wheels without touching anything besides removing the front mud flaps. I’m waiting on my westcott designs lift kit but I’m liking how it looks at this height now

 

installed pro grille, what a pain in the dick that was

 

Unless you only drive in reverse your flag is backwards.

 

Where did you get the hood decal?

 

Added a bed mat and retrax mx one tonneau! (Thanks @SantanaRealtruck for the deal!)

 

Finally got some new wheels and tires ! Method 305 +18 , tires : 295/70/18 Yokohama X-ats. My truck is an SR5 premium with the load leveling suspension, non Avs... basically it's the basic suspension with rear air suspension. I've adjusted the air suspension lever in the rear, got about a solid 1.75 out of it. The front tires rub , passenger more soo. I feel if I go get an alignment it won't rub... not sure will have to test it out. I am going to put a rough country 1.75 level. When times right I will update the entiresuspension and keep the air in the back.

 

what brand bed Mat is that?

 

https://realtruck.com/p/black-armour-truck-bed-mat/

 

It is what @Brums linked, smells something fierce though, some other folks said that fades within 3-4 weeks.

 

Picked up a Toyota bed mat today. I like it. It’s already laying flat thanks to this good ole Oklahoma sun.

 

new rims, swapped oe tires

 

I like it. Looks really good.

 

installed the Bak Revolver X4s






Also Installed bed decals







got them off of eBay from Benini Design Studio, really great seller, he worked with me to get the correct sizing of the decals for the 6.5ft bed, looks like he also sells hood and other stripes and such, the vinyl that its made from is good and thick, really quality in my opinion.
think i might go with the hood one next,

link to the one i got https://www.ebay.com/itm/334410180583
link to his store, https://www.ebay.com/str/beninidesignstudio
hes got all kinds of different decals

 

It was a nice day out so I took the mountain bike for a ride while the dealer installed the Dashcam. I also got one of

$120 INNO RT202 Truck Bed Bike Rack - Bike Mount for Pickup Truck with C-Channel Track Systems

these c channel bike racks. So far I love it. I'm going to get a second one for the other side so we can take the wife's bike up to the trails as well.

 

Those are great! I was rocking those mounts as well before I installed the Tonneau cover, then I switched over to the Fox tailgate pad.

 

Got 3+ bikes (wife’s ‘on the way’) so I am rocking a pad also after just having them strewn in the back for years in my 2015.

 

Nice truck!
How was Dick Hannah (dealership) to work with? I gave them a deposit about a month ago.

 

They were great to work with. It was so easy in fact that I was suspicious till we got to signing the papers. I would say its the opposite of most experiences I've had with dealers. The parts department didn't seem to eager to try and help me find some parts (the bed step and bracket assembly) so I recommend going somewhere else for that.

 

I added three 3 gallon Rotopax to my @KB Voodoo Pro Max rack today. The racks have holes pre cut for Rotopax’s carriage bolts and mounting patterns. Easy. Modular.

I’ve got a couple discount codes available for racks