1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

General Supercharger Thread.

Discussion in 'Performance and Tuning' started by snivilous, Mar 18, 2021.

  1. Jun 1, 2022 at 2:44 PM
    #2011
    Silver17

    Silver17 Used, but returned and sold as new member

    Joined:
    Oct 3, 2021
    Member:
    #68847
    Messages:
    2,577
    Gender:
    Male
    Eastern PA
    Vehicle:
    2017 TRD 4x4 Harrop SC
    Eibach pro 2.0s, toytec progressive mini AAL, ARE CX cap, Airlift bags, Harrop Supercharger, 650cc injectors, 77.5mm pulley, TRD Dual exhaust, J&L catchcan, Powertrax LSD, RRW RR7-H, 305/70r17 Toyo AT3s
    Those numbers though are based on what I’ve seen from the Harrop supercharged trucks on the web. Not sure how easy it is to get those numbers out of the magnuson.
     
  2. Jun 1, 2022 at 2:44 PM
    #2012
    Saltyhero13

    Saltyhero13 Throbbing Member

    Joined:
    Aug 12, 2020
    Member:
    #50704
    Messages:
    4,446
    Fuel delete mod Cup holder upgrade
  3. Jun 5, 2022 at 3:33 PM
    #2013
    Silver17

    Silver17 Used, but returned and sold as new member

    Joined:
    Oct 3, 2021
    Member:
    #68847
    Messages:
    2,577
    Gender:
    Male
    Eastern PA
    Vehicle:
    2017 TRD 4x4 Harrop SC
    Eibach pro 2.0s, toytec progressive mini AAL, ARE CX cap, Airlift bags, Harrop Supercharger, 650cc injectors, 77.5mm pulley, TRD Dual exhaust, J&L catchcan, Powertrax LSD, RRW RR7-H, 305/70r17 Toyo AT3s
    Was it this thread that I read someone mentioned their intercooler pump relay was sticking? I noticed mine just started doing it, both sticking on and off. Only 6k miles on it since the install. I know it’s a cheap easy to replace part. I’m wondering if there is a beefier alternative than buying another one from Harrop.
     
  4. Jun 5, 2022 at 3:42 PM
    #2014
    Saltyhero13

    Saltyhero13 Throbbing Member

    Joined:
    Aug 12, 2020
    Member:
    #50704
    Messages:
    4,446
    Fuel delete mod Cup holder upgrade
    Yeah I think it was @nobodyintexas that had that issue
     
    Silver17[QUOTED] likes this.
  5. Jun 5, 2022 at 3:52 PM
    #2015
    nobodyintexas

    nobodyintexas What?

    Joined:
    Jun 22, 2020
    Member:
    #48303
    Messages:
    3,881
    South of Houston
    Vehicle:
    S/C'd 2020 White 1794 Tundra
    Whatever this forum told me to do
    Yup

    I banged on the relay and it stopped

    it happened 3 times to me

    not recently though

    it only happened when I used accessory and then shut it off

    never happened when I started the truck and turned it off properly

    The relay is the issue. One of these days I’ll replace it with a better one

    too hot now
     
  6. Jun 5, 2022 at 4:47 PM
    #2016
    Silver17

    Silver17 Used, but returned and sold as new member

    Joined:
    Oct 3, 2021
    Member:
    #68847
    Messages:
    2,577
    Gender:
    Male
    Eastern PA
    Vehicle:
    2017 TRD 4x4 Harrop SC
    Eibach pro 2.0s, toytec progressive mini AAL, ARE CX cap, Airlift bags, Harrop Supercharger, 650cc injectors, 77.5mm pulley, TRD Dual exhaust, J&L catchcan, Powertrax LSD, RRW RR7-H, 305/70r17 Toyo AT3s
    I only noticed mine was acting up because I tied in my LED DRLs with that relay. I’ll have to do some research. Maybe I can find the same relay but a different brand. The brand they sourced obviously sucks.
     
  7. Jun 5, 2022 at 5:41 PM
    #2017
    Saltyhero13

    Saltyhero13 Throbbing Member

    Joined:
    Aug 12, 2020
    Member:
    #50704
    Messages:
    4,446
    Fuel delete mod Cup holder upgrade
    Does it stick without the LED tied to the relay?
     
  8. Jun 5, 2022 at 5:47 PM
    #2018
    Silver17

    Silver17 Used, but returned and sold as new member

    Joined:
    Oct 3, 2021
    Member:
    #68847
    Messages:
    2,577
    Gender:
    Male
    Eastern PA
    Vehicle:
    2017 TRD 4x4 Harrop SC
    Eibach pro 2.0s, toytec progressive mini AAL, ARE CX cap, Airlift bags, Harrop Supercharger, 650cc injectors, 77.5mm pulley, TRD Dual exhaust, J&L catchcan, Powertrax LSD, RRW RR7-H, 305/70r17 Toyo AT3s
    I have not tried cause it would be a pain to undo my wiring, but electrically it wouldn’t make sense that it would cause it to stick. The DRLs draw about 1 amp and are tied into the load side of the relay. I spliced directly into the wire feeding the pump and not the control (trigger) circuit.
     
  9. Jun 5, 2022 at 5:55 PM
    #2019
    Saltyhero13

    Saltyhero13 Throbbing Member

    Joined:
    Aug 12, 2020
    Member:
    #50704
    Messages:
    4,446
    Fuel delete mod Cup holder upgrade
    I don't disagree but if the problem came with the connection of the LEDs to the relay it is likely related to the install unless the relay was damaged or a connection is loose.
     
  10. Jun 5, 2022 at 6:09 PM
    #2020
    Silver17

    Silver17 Used, but returned and sold as new member

    Joined:
    Oct 3, 2021
    Member:
    #68847
    Messages:
    2,577
    Gender:
    Male
    Eastern PA
    Vehicle:
    2017 TRD 4x4 Harrop SC
    Eibach pro 2.0s, toytec progressive mini AAL, ARE CX cap, Airlift bags, Harrop Supercharger, 650cc injectors, 77.5mm pulley, TRD Dual exhaust, J&L catchcan, Powertrax LSD, RRW RR7-H, 305/70r17 Toyo AT3s
    I do understand your thought, but the issue just started and I’ve had the LEDs wired this way for several months.
     
  11. Jun 5, 2022 at 6:46 PM
    #2021
    Saltyhero13

    Saltyhero13 Throbbing Member

    Joined:
    Aug 12, 2020
    Member:
    #50704
    Messages:
    4,446
    Fuel delete mod Cup holder upgrade
    So the answer was no. :)
     
  12. Jun 6, 2022 at 1:59 AM
    #2022
    nobodyintexas

    nobodyintexas What?

    Joined:
    Jun 22, 2020
    Member:
    #48303
    Messages:
    3,881
    South of Houston
    Vehicle:
    S/C'd 2020 White 1794 Tundra
    Whatever this forum told me to do
    I’m wired into the fog backlight too

    it happened twice before the fogs, once after

    back in my car stereo days, I would have fixed this easy. I had a box of Bosch single pole single throws laying around

    today. Not so much
     
  13. Jun 6, 2022 at 5:33 AM
    #2023
    Saltyhero13

    Saltyhero13 Throbbing Member

    Joined:
    Aug 12, 2020
    Member:
    #50704
    Messages:
    4,446
    Fuel delete mod Cup holder upgrade
    I've seen relays get stuck by contact welding in high power applications, I don't think that is the case here especially not if the relay is able to toggle back between the two states.

    The more likely culprit can be vibration not sure if it is possible to dampen it in this application but it may be easier and cheaper than replacing it (not that relays are prohibitively expensive).
     
  14. Jun 6, 2022 at 5:36 AM
    #2024
    nobodyintexas

    nobodyintexas What?

    Joined:
    Jun 22, 2020
    Member:
    #48303
    Messages:
    3,881
    South of Houston
    Vehicle:
    S/C'd 2020 White 1794 Tundra
    Whatever this forum told me to do
    ...and I'm still adding about 2oz's of coolant to the intercooler each couple of months.

    not complaining...just reminding y'all to check your coolant.

    might be because it's already Africa-hot in Houston.
     
    vq35721 likes this.
  15. Jun 6, 2022 at 5:37 AM
    #2025
    Saltyhero13

    Saltyhero13 Throbbing Member

    Joined:
    Aug 12, 2020
    Member:
    #50704
    Messages:
    4,446
    Fuel delete mod Cup holder upgrade
    No noticeable leaks?
     
  16. Jun 6, 2022 at 5:39 AM
    #2026
    nobodyintexas

    nobodyintexas What?

    Joined:
    Jun 22, 2020
    Member:
    #48303
    Messages:
    3,881
    South of Houston
    Vehicle:
    S/C'd 2020 White 1794 Tundra
    Whatever this forum told me to do
    not yet.

    I'll do a better job looking in a couple weeks, when I do the next oil change.

    I use the red stuff, so it should be easy to see....
     
    Saltyhero13[QUOTED] likes this.
  17. Jun 6, 2022 at 6:33 AM
    #2027
    Saltyhero13

    Saltyhero13 Throbbing Member

    Joined:
    Aug 12, 2020
    Member:
    #50704
    Messages:
    4,446
    Fuel delete mod Cup holder upgrade
  18. Jun 6, 2022 at 6:34 AM
    #2028
    nags

    nags New Member

    Joined:
    Jun 3, 2021
    Member:
    #63829
    Messages:
    590
    Gender:
    Male
    Florida
    Vehicle:
    2008 SC RCSB w/ all the goodies.
    Ooowie

    TIpQEQEePHRtoS_eoFF0VcygfRotnFK4nBj_ZIab_f493011c93b60562e9d125b2c57929f4fe597752.jpg
     
    M3Tundra-JK likes this.
  19. Jun 6, 2022 at 6:36 AM
    #2029
    nobodyintexas

    nobodyintexas What?

    Joined:
    Jun 22, 2020
    Member:
    #48303
    Messages:
    3,881
    South of Houston
    Vehicle:
    S/C'd 2020 White 1794 Tundra
    Whatever this forum told me to do
    yesssss....

    upload_2022-6-6_8-35-59.jpg
     
    Saltyhero13 and nags[QUOTED] like this.
  20. Jun 6, 2022 at 6:37 AM
    #2030
    nobodyintexas

    nobodyintexas What?

    Joined:
    Jun 22, 2020
    Member:
    #48303
    Messages:
    3,881
    South of Houston
    Vehicle:
    S/C'd 2020 White 1794 Tundra
    Whatever this forum told me to do
    I learn every time I watch that dude. (which is not hard when you are me)
     
    Saltyhero13[QUOTED] likes this.
  21. Jun 6, 2022 at 6:40 AM
    #2031
    Saltyhero13

    Saltyhero13 Throbbing Member

    Joined:
    Aug 12, 2020
    Member:
    #50704
    Messages:
    4,446
    Fuel delete mod Cup holder upgrade
    He is a great explainer. Even his long videos are dense with info.
     
  22. Jun 6, 2022 at 11:19 AM
    #2032
    nags

    nags New Member

    Joined:
    Jun 3, 2021
    Member:
    #63829
    Messages:
    590
    Gender:
    Male
    Florida
    Vehicle:
    2008 SC RCSB w/ all the goodies.
    Here goes. Just sent some fresh logs off to ProSpeed.

    EE0AjnDOR1xs8mBhqRijUEx6IjdNIV76mHwdi63X_5e18a1f560cc5d89514cb9c8868ed0ac3fdbc2ad.jpg
     
    chugs, snivilous[OP], reywcms and 9 others like this.
  23. Jun 6, 2022 at 1:15 PM
    #2033
    Silver17

    Silver17 Used, but returned and sold as new member

    Joined:
    Oct 3, 2021
    Member:
    #68847
    Messages:
    2,577
    Gender:
    Male
    Eastern PA
    Vehicle:
    2017 TRD 4x4 Harrop SC
    Eibach pro 2.0s, toytec progressive mini AAL, ARE CX cap, Airlift bags, Harrop Supercharger, 650cc injectors, 77.5mm pulley, TRD Dual exhaust, J&L catchcan, Powertrax LSD, RRW RR7-H, 305/70r17 Toyo AT3s
    I’ll give mine another look but I think it’s leveled out the last few times I checked. It should eventually work out all of the air pockets and stop needing to be topped off. If it continues to need more added I’d start looking for a leak just in case. I pray none of us ever have to deal with the leaking heat exchanger cores in the blower. Some of the first Harrop units for our trucks had a defect and leaked coolant into the intakes. It killed at least 1 engine I’m aware of. This is probably not the case, but it’s good to be aware anyway.
     
  24. Jun 6, 2022 at 7:30 PM
    #2034
    Silver17

    Silver17 Used, but returned and sold as new member

    Joined:
    Oct 3, 2021
    Member:
    #68847
    Messages:
    2,577
    Gender:
    Male
    Eastern PA
    Vehicle:
    2017 TRD 4x4 Harrop SC
    Eibach pro 2.0s, toytec progressive mini AAL, ARE CX cap, Airlift bags, Harrop Supercharger, 650cc injectors, 77.5mm pulley, TRD Dual exhaust, J&L catchcan, Powertrax LSD, RRW RR7-H, 305/70r17 Toyo AT3s
  25. Jun 7, 2022 at 8:11 AM
    #2035
    Downytide

    Downytide New Member

    Joined:
    Sep 3, 2020
    Member:
    #51715
    Messages:
    1,599
    Gender:
    Male
    GTA
    Vehicle:
    Lunar Rock with trail boxes
    Lead the way! just saw that there's going to be "redeye" TRX, and Raptor R is ready to drop, we going to have to put in extra work to get that "TRXLOL" plate.
     
  26. Jun 7, 2022 at 8:14 AM
    #2036
    nags

    nags New Member

    Joined:
    Jun 3, 2021
    Member:
    #63829
    Messages:
    590
    Gender:
    Male
    Florida
    Vehicle:
    2008 SC RCSB w/ all the goodies.
    Don't think I have enough money for that plate.

    I'm pretty much at the end of the road unless I do a forged bottom end or build my heads. And I'm told both will make this no longer reliable enough for a daily.
     
    M3Tundra-JK likes this.
  27. Jun 7, 2022 at 8:43 AM
    #2037
    Downytide

    Downytide New Member

    Joined:
    Sep 3, 2020
    Member:
    #51715
    Messages:
    1,599
    Gender:
    Male
    GTA
    Vehicle:
    Lunar Rock with trail boxes
    Is that what XAT/Prospeed feedback? I'd assume with a built bottom end and 700hp at crank it should be ok as long as we are not under wot at high load constantly.
     
    snivilous[OP] likes this.
  28. Jun 7, 2022 at 8:43 AM
    #2038
    vq35721

    vq35721 New Member

    Joined:
    Sep 21, 2017
    Member:
    #9808
    Messages:
    768
    Gender:
    Male
    SoCal
    Vehicle:
    2011 040 SR5
    Too much to list
    Is it worth the $$$
     
  29. Jun 7, 2022 at 8:44 AM
    #2039
    nags

    nags New Member

    Joined:
    Jun 3, 2021
    Member:
    #63829
    Messages:
    590
    Gender:
    Male
    Florida
    Vehicle:
    2008 SC RCSB w/ all the goodies.
    Definitely didn't notice any night and day difference or anything.. But having done just about everything else I can do... Seemed worth it to put the cherry on top.
     
    vq35721[QUOTED] and M3Tundra-JK like this.
  30. Jun 7, 2022 at 8:47 AM
    #2040
    M3Tundra-JK

    M3Tundra-JK New Member

    Joined:
    May 3, 2022
    Member:
    #77930
    Messages:
    2,130
    Gender:
    Male
    First Name:
    Scott
    Vehicle:
    2005 GX470
    Same reason I kept all the mods on my TRD S/C Tacoma build mild, and NOT wild. Sure the bearings on the s/c needed replacing when I sold it, but it was installed on the truck pretty much since day 1 and got 90k miles on it before I sold with no issues. Will be going the same route when putting the TRD S/C on the Tundra. Want to get many many miles out of this thing!

    PXL_20220607_012426789.jpg
     

    Attached Files:

    snivilous[OP], reywcms and vq35721 like this.

Products Discussed in

To Top