1st Gen. Lunch Table - General Discussion

Need to find this compartment cover (maybe @shifty` Knows where to find one) NLA from Toyota.


I’ve also got to get some felt so I can make liners for these so shit doesn’t rattle around

 

Happy I can potentially help you out for a change.

So here's a shot from mine directly from the truck. Note where OEM felt is.

Base part number as you see is 58833-0c040, but you won't find it in the system without the two-digit color code suffix. Like, 58833-0c040-e0 is OAK, 58833-0c040-b0 is DK CHARCOAL (I believe that's my color), 58833-0c040-b1 is DK GREY. I can't nail down which of your two is correct, b0 or b1.

LMK if you need more pics.

 

PS - dropping this here for you - this is the console page specifically for my '06 Limited. https://parts.toyota.com/a/Toyota_2...6710985/CONSOLE-BOX--BRACKET/841420-5855.html

Here's the exploded, part you're hunting boxed in red. Search the page linked for 58833A returns three hits for my '06, and as you can see in the pic below exploded..... All are discontinued. This may end up being a JY pull for you.

 

dark grey is what we've got. then medium grey is the door panels and stuff. Dark grey is color code 12. which if you look at your vin tag it should say XX12 (XX changes depending on fabirc, leather, etc)

unfortunately it appears that parts NLA. i'll have to check at work tomorrow if any dealers have one laying around

i keep hunting junkyards but NO one has a dark grey interior truck

 

anyone know any 3d printers that can model things? Would be cool if the files were out there. Maybe i could have some printed in aluminum someday.

 

tacos are my main gig. i cant get rid of the boosted ones. lol

 

Ok, feeling pretty confident in some terrible ideas. Done some research but found lots of opinions, but fewer facts.


@empty_lord any forethought as to why this will end in disaster?
2019 taco front springs are 700lbs. The ones ive got have the ‘stick’ for an extra 3” or so. They’re the trd
Am i correct in assuming aftermarket bj uppers can handle the angles at 3” taller, or is that uniball territory?
Are AC ?springtowers? Strong enough for extra spring and weight?



its time for BJ’s and ive saved alot of money by not buying a bumper yet, i can throw money at something thats necessary.


in plan ‘b’s pic whats the bent steering link looking thing?

 

Because it's an insert, this is one of those cases where you could get away with going a darker color and it still looks natural. Many cars do solid black for inserts. You may consider charcoal for this, but ... again, it'd probably be a JY pull

 

eh. one will pop up

 

Seems to me a 3" longer shocks and 700# springs are going to push you pretty high. More than 3". If @Darkness is right about the ratio of 1.6X @ the shock, 3" longer body is almost 5" of lift before the heavier springs. I don't see how those work but maybe I'm missing something. If you are doing bumper and other weight later, a coilover is pretty nice. I've adjusted mine a dozen times for weight and stuff. I like Fox and King based on some experience with both, and what others have to say. Big money though...

 

Yea, they’re really only 2.5 inches longer, and if i build a hitch bumper i might have to hang a motorcycle off the front end. On the sxs, i saw how they reininforced the control arm mounts to compensate for portals, so i figure that and maybe a pin could reinforce the cam bolts.
Daddy raised a cheap bastard, i always will be. I can keep the hoard for a rainy day, or i can sell some valuables and do it right. Not both.

 

I like the res adjusters on the Fox shocks - but reservoirs are really not needed. I have non-res Kings and even King tells me I'm never going to overheat my oil with 4" of stroke and non-race application. The super adjustable ones are cool for changing the ride, just not necessary.

 

F necessary. Even my 2013 Prius wasn’t necessary. I’d have been fine with my bicycle.

 

I’ve got the freetime to turn a few screws for launches. But you get it. A little overkill.

???

 

Might need some sort of gasket maker on that setup?

 

And there's that too...how did I forget?

 

@Sirfive my magic 8 ball says the taco setup won't work, but if you have it on hand it wouldn't hurt to try a mockup and see where you land. If they are 2.5" longer overall, I think its a bad idea, especially if they run 700lbs coils (which would surprise me, O would think in the 550lbs range).

 

What if he bends his spindles? I bet you could gain some clearance that way

 

I wonder if i can get some measurement and get qa1 to build me a long arm setup on the cheap-ish. I too was surprised at the ridgeline rates, but assumed maybe the arms have more leverage. No clue, and i dont really have a good way to measure.

 

i think you may be my favorite.

 

I must be special, you actually took the time to quote me!

 

Is the brown water on board?

 

Que?

 

Scotch, bourbon, whiskey...

 

Cat guard setup, would have bought yours!

 

I prefer to half sleep, listening for sawzalls all night, hoping to go to work on someone who made the wrong choices in life.

Better believe if i catch someone with these, we’re gonna have a long night.
https://m.northerntool.com/shop/too...cALkXQTU8iEHfvNsJAxoCwJYQAvD_BwE&gclsrc=aw.ds

 

Same same, I wake up to mouse farts hoping it was a sawzall. Saturday night someone was shooting off big boomers at like 1-2am, someone was excited for passover!

 

But they are klutch in a pinche...

 

Ive thought about it.
https://www.axletech.com/en/products/suspensions-modules/portal-wheel-end

Got the feeling id have to sell most of my valuables to go that route.

 

Adds 75 lbs per corner?