What have you done to your 2.5 gen Tundra today?

Phoenix Android Radios. They have a new version out where you can select silver, matte black, or glossy black for the trim, and it has a much more powerful processor that runs Android 10. I am seriously considering upgrading.

https://phoenixautomotiveinc.com/co...screen-navi-radio-for-toyota-tundra-2014-2019

 

Multiple tablets:

• What do you do for data on all 3 devices, a SIM card in each?

On the head unit:

• Did you lose any functionality over the stock head unit?
• Multiple camera inputs, or would I still need a FRAC harness?

 

I'll add a question to yours. Speaking of functionality, how about steering wheel controls?

 

That's just s great looking truck period!

 

Finished up the bumper. Absolutely ecstatic with how it came out. Just took a quick pic, nicer ones are coming.

Still have to make some fog light brackets for my SS3’s, install the S8 30” bar, and get a winch.

 

Good deal on the rims!

 

Tablet on right linked to a WiFi OBD2 for Torque Pro. Tablet on left I pair with my iPhone for data for Waze. WAY increased functionality over stock HU, input levels can be adjusted so it really opens up the JBL system over stock. Plus there are sub outs for my JBL 1,000 watt amp and JBL 10" subs. Multiple video inputs so you can have both front and rear camera access without FRAC.

 

Steering wheel controls are maintained.

 

Look amazing!

 

Thanks !!!!
so far 1,350 miles on her and;
1- replaced decals with all black aftermarket
2- replaced the Climate, Vents and radio knobs with the AJT and just have the steering wheel left to do probably tomorrow
3- Cat Security Cat shields this week done and done front and rear
4- locking metal gas lid/cap and swapped the keyed with a barrel key
5- Lock'er down front seat gun safe
6- Rifle locker under rear seat from ESP
7- Fender flares, took em as is and sanded, primed, bed liner coated and sealed them
8- removed front chrome grill and hood bump and also primed and painted black
9- bumper shellz to front and back bumpers
10- had Drone alarm system installed / forgot the model but it's fully cellular and full remote function from key fob or app/web
11- ceramic tint on all 6 glass areas including front windshield
12- Pedal Commander
13- Wireless link for Apple Carplay
14- installed Decked Drawers
15- assembled and mounted RSI Smartcap

only a few things left !!!
AJT steering wheel install
waiting on bed rails
wire in the streaming camera for rear view mirror

Going to insulate the Smartcap
Run wiring for solar lighting so never have to worry about juice and lights in the rear
find the roof rail rack I like
build some sort of storage assembly for the back for side and rear access for when camping/adventuring

whew .....

 

Trying to figure out, is Phoenix just a cool name or are they based in PHX ? Going to be driving through there in the spring and if they have a showroom get a first hand look at their stuff before pulling the trigger.

 

I had the neighbor kid help me put a big black piece of vinyl on the hood. I think it looks cool!

 

Looks sooooo good!

What material did you use? Was the install easy?

 

Put on some bumper shellz from ecoologic. Came out decent, but I forked up the passenger side parking sensor and the clip holding the wheel well guard. Hopefully its not too expensive to fix.

 

Looks pretty easy considering he had the neighbor kid do it!

 

An overdue addition went in today

 

I am digging the look! This is definitely something I want to do. I wish I had a similarly talented neighbor kid...

 

Installed the Meso Customs 3-piece chrome delete kit for the center console. PITA with those plastic welds holding two of the pieces in place, but once I drilled out the holes and broke off the small ones on the shifter piece, it was easy to complete.

 

Put some Rough Country tow hooks on yesterday and painted the super red II. It matches pretty good. Then gave her a bath today.

 

Continued my Crusade Against Chrome by installing some black Bumper Shells. Thy will hold me over until I replace the stock bumper.

 

That looks awesome! That's some turnaround time btw. Guess I better check my ship date. I ordered them the day after the release.

 

Thinking of doing the same, but I was curios about the wiring inside the console. Does it just plug into the 12V outlet? Does it interfere when you open the console lid to retrieve anything?

 

I ordered as soon as they were available and they arrived in VA yesterday.

 

there is a Y harness that is plug and play from the charger to the 12volt. There is an exposed hinge piece you attach to route it cleanly

 

Meso is supposed to put a video up asap. I’am waiting for the video to see the install.

 

Just so you know, my experience has been this is more of a battery maintainer than a charger. If I really need to charge my phone I still plug it in because you’ll get maybe a few %/hour IME. I’ve tried different phones and cases with same results.

 

My shipment appears to be in Sacramento ATM.

 

Yellow fog light overlay and light smoke tint on the front grill emblem, taillights, and 3rd brake light

 

Its been a while since ive done a mod on the Tundra as ive been more focused on an FJ I picked up a few months ago. Today I installed new map and dome lights from Meso Customs. The drivers side map light has been out since 1 month of ownership after installing some LED bulbs from Amazon. Once I removed the upper map light console I noticed the white connector block for the drivers side light had been moved and disconnected which is why it wasnt working. Feels good to finally get that fixed. Oh and these meso custom lights are awesome!