What have you done to your 2.5 gen Tundra today?

Mud flaps and all dealer logos removed. Too cold to debadge but that's coming next.

 

Hello Max! Fine looking pup!

 

Welcome! Bought my truck from Stapp as well.

 

I just changed the key fob settings so that 1 push unlocks all doors instead of having to press the button twice. Very nice to have this option. I know this is old news but I've only had this truck for like a month so it's still pretty new to me

 

Welcome from NY.

 

Installed today the rough country lower bumper LED light bar. It went well other than freezing at -10 c and the 6 darn bumper nuts were a pain to remove and tighten up again.
Can't stand the rough country switch. Ordered proper push switch to fit the OEM switches.

 

Got out to camp tonight. Full moon fun.
Installed the ditch lights (light fox off Amazon) and looks good. Not nearly as much lumens as the auxbeam lights I had before. Hit 2 water crossings and some 4x4 for my first time. It was great such a capable truck.

 

Said lights

 

I highly recommend them. The ride is much more balanced. Pairs well with Fox 2.5 DSC's.

Be prepared for a 4+ month lead time, lol.

 

I used SEM trim paint on mine and it has held up really well.

https://www.walmart.com/ip/SEM-Trim...LBNTJ9vA728ZmIE1lCAaAgcWEALw_wcB&gclsrc=aw.ds

 

X2

 

Heeler?

 

Yes heeler, fun fact: oldest dog ever was named bluey, herded cattle for 20 years in Australia and was put to sleep at the ripe old age of 29!

 

My 2020 has them. My wife’s 2019 Rav 4 has an auto position but still also has Off.

 

I have that button on my 2020. Kinda useless.

 

debadge that trd sticker too. It would look much better.

 

If your truck came with the amber light as the drl you can get rid of it if you want by changing out a module in the cab (easy swap). With the ihacker harness you can have the led ring as the drl. I didnt want to mess with splicing wires so mine are on high all the time.

 

Is the RC light bar white or Amber?

 

Nice truck! I have the OPT7 light bar as well. Do you have any photos of the taillights when they’re not on? I’m looking for a dark smoke appearance. I currently have Luxe LightWrap on my stock taillights. I was going to wait for Morimoto taillights to come out for the Tundra, but yours look pretty good.
Where are you in Ohio? I’m near Athens.

 

Helping you spend your money:
FS: 3 switch panel insert plate | Toyota Tundra Forum (tundras.com)

 

Thinking about it. We shall see.

 

I haven’t missed mine at all. Stages of debadging…

 

how much beefier than stock springs are those? what are you carrying or doing with the truck...I think i need something similar but dont want it to ride like a dump truck when its empty

 

I have auto headlights and auto high beams on my 2018.

 

Just disassembled my running boards (removed brackets and plastic step pieces) and dropped them off to be powder coated. Remind me to never do this nonsense in January again, it’s 50° today and I’m freezing my ass off.

 

They're quite a bit beefier. The Deavers have 9 leaves and the stock only has 4. Although the stock leaves do appear a little thicker each.

My stock leaf springs were completely flat. I don't use the bed much to haul on a daily basis but I do have a Leitner rack with a couple of gear pods. When we go camping 4-5 times a year the truck is fairly loaded up.

The ride now is firm but not harsh. With the Fox 2.5 DSC's and 700lb springs in the front it all works well together. The coilovers and rear shocks are also tuned by Accutune.

 

Took the truck back to the body shop to have them fix some sub-par work they did repairing the the paint on the roof but I have question for the group. For the damage that is circled in yellow, do you see in the other pictures circled in blue? Would love your input.

 

Nice looking mgm , think I’ll do some debadging today ,mind me asking what lift height you have

 

Welcome. I like the Steely Dan call out in your handle

 

Thanks. I’m running 6112 set at 1.9” with one CB shim on driver’s side. Back has 5160s and a CB +2 shackle.