What have you done to your 1st gen Tundra today?

Just for brake, for cargo lights I installed led strips with 3m. For power it’s tapped into the hot 12v on the 7pin tow hook up. Downside is it only works with the key in. I need to wire it to the battery, just been lazy

 

Cool, yeah, my shell 3rd brake has been off taillight T tap for 20 years now. I’m going to redo to integrated T harness for DIR and shell with the new taillights.

The chmsl ground is going to loop to the shell connector so that when the shell is off I can plug a loop back to restore cab chmsl. Doesn’t serve any purpose when the shell is on

 

I’ve been locked at home these past few days after having surgery to correct severe long term hemorrhoids. Been reading this entire thread which is amazing through the first thousand pages. Entertaining, as well as informative! You guys rock!

 

I took in some material in to have a new set of 'Drapes' sewn (yes you read that correctly) for the shell on my DC.
The gal doing them is backed up, and it's been over 3-weeks . . . so any day now.
I'll post pics. after I get them installed so you hounds can have a field-day heckling me ! LOL

 

These are for the HVAC controls right? Realized all three of mine are out and hoping it's just new bulbs, any chance that's the case?

 

Pulled the fogs and got some aluminum bar stock to clamp them better. Zipped tied the wire as well and put some thread locker on the bolt. This should be good to go now.

 

Got my DD lights mounted on my ditch light brackets. All wire is ran, I just need to connect the +\- and the ignition hot to the auxbeam controller and we’re good to go!

 

Installed fog light switchbacks from deAuto LED. Lifetime warranty. Very satisfied with the quality and brightness.

In the pictures the headlights look blue but they're more white. The yellow lights in person look like a deeper yellow. I wasn't able to get a true representation picture of the fog lights.

For the side markers I used Amber LasFit. They are bright and never flicker or fail early. Matched it with a 8-pin flasher relay that supports LED.

https://www.ebay.com/itm/3156-3157-...-Dodge-Ram-1500-1994-2010-Amber-/124131561381

iJDMTOY 8-Pin LM449 81980-50030 066500-4650 Electronic LED Flasher Assy Relay Fix Compatible With Lexus Scion or Toyota LED Turn Signal Light Bulbs

$12 iJDMTOY 8-Pin LM449 81980-50030 066500-4650 Electronic LED Flasher Assy Relay Fix Compatible with Lexus Scion or Toyota LED Turn Signal Light Bulbs

https://www.amazon.com/dp/B008C9YS0Y?_encoding=UTF8

https://deautokey.com/product/dual-...anytime?mc_cid=924dade8cc&mc_eid=[ba8e6ebcb9]

 

Those look great! Switchback fogs are a solid idea!

 

Yes -- there are 7 bulbs total.

 

I need to find someone who can paint the inside white plastic a chrome color. My white bulbs are off white in mine cause the whites yellowed with age and heat from the old bulbs

 

These are the white LED bulbs with the original green balloon from the existing bulb I used for the HVAC cluster, ashtray, glove box, ignition, and cigarette lighter. The secret to remove the glove box bulb is to get a rubber tube that fits over the existing bulb tightly to remove it.

WLJH 6Pack White Dash Lights PC74 Twist Locket Socket Wedge T5 LED Bulb 37 74 2721 3030SMD Dashboard Instrument Cluster Bulbs,Plug and Play https://www.amazon.com/dp/B0799MQ12...abc_GKVDJM8E42WZVMZS4858?_encoding=UTF8

SYLVANIA 168 T10 W5W White LED Bulb, (Contains 2 Bulbs) (168SL.BP2) https://www.amazon.com/dp/B01BDWLZH...abc_MB4A2Q2RTBYQWHQX6Z06?_encoding=UTF8

 

For my 2002 Tundra SR5 AC TRD with factory JBL double DIN radio. I Installed ATOTO S8 Pro with front and reverse cameras. Bluetooth OBD2 scanner for Torque. A Kicker 10” subwoofer under driver seat. Using factory JBL amp and speakers. The DSP on this radio made these factory speakers sound high end at normal listening volume. So many options to adjust crossover, field of sound, subwoofer frequency, etc. Distortion starts when you crank it loud enough to allow others not in the vehicle to hear. I don't listen to music that loud anymore. So this is a perfect setup for me.


Links:
Radio: [DAH10D/QLED] ATOTO S8 Pro S8G2104PR-N Double-DIN Android Car Stereo Receiver,Dual Bluetooth w/aptX HD,USB Tethering, Split Screen Display,Android Auto & CarPlay,VSV&LRV,Built-in 4G Cellular Modem

$450 [10"/QLED] ATOTO S8 Pro S8G2104PR-N Double-DIN Android Car Stereo Receiver,Wireless CarPlay & Android Auto,Dual BT w/aptX HD,Split Screen Display,USB Tethering, VSV&LRV, Built-in 4G Cellular Modem

https://www.amazon.com/dp/B085C6KLFX?_encoding=UTF8

ATOTO AC-44P2 1080P USB DVR On-Dash Camera - Sony Sensor for Image- Recording Video On Camera End - Operation & Preview from ATOTO A6/S8 Car Stereo Side

$49 ATOTO AC-44P2 1080P USB DVR On-Dash Camera - Recording Video On Camera End -Compatible with ATOTO A5/ A6/ S8 / P9/ Series. Not Compatible with F7 & P5 & P8 & X10 Series

https://www.amazon.com/dp/B0822KMK48?_encoding=UTF8

Universal Car DVD GPS Player Steering Wheel Remote Control (2018) with Audio Volume/Phone Answering and Hanging Up/DVD Bluetooth Radio Switch for Car Audio Video Navigation System https://www.amazon.com/dp/B0797T7H5K?_encoding=UTF8

KICKER 46HS10 Compact Powered 10-inch Subwoofer

$315 KICKER 46HS10 Hideaway Compact Powered Subwoofer, 10"

https://www.amazon.com/dp/B083M9HR4D?_encoding=UTF8

HD 720P eRapta ERT02 Backup Camera Front Rear View License Plate Reverse Universal for Pickup Truck Car SUV 149° Perfect Angle Night Vision Mirror Function Waterproof

$33 HD eRapta ERT02 Backup Camera Rear View License Plate Reverse Camera Universal for Pickup Truck Car SUV 149° Perfect Angle Night Vision IP69K Level Waterproof

https://www.amazon.com/dp/B076P8QFYD?_encoding=UTF8

Metra 70-8113 Amplifier Integration Harness for Select 2000-2004 Toyota Vehicles

$13 Metra Electronics 70-8113 Amplifier Integration Harness for Select 2000-2004 Toyota Vehicles

https://www.amazon.com/dp/B0007WRQQ2?_encoding=UTF8

Bafx Products - For Android Only - Wireless Bluetooth Obd2 Scanner Diagnostic Code Reader & Scan Tool - Scan, Reset & Clear Car Check Engine Light

for Android Phones ONLY - Wireless Bluetooth Diagnostic OBD2 Scanner Car Code Reader and Scan Tool for All 1996 & Newer Vehicles ELM327 Compatible OBDII

https://www.amazon.com/dp/B005NLQAHS?_encoding=UTF8

 

I got about a year out of one of these cheap flashers on my 08 Lexus before it stopped flashing and just stayed on solid. Just a heads up. The diode dynamics one has tap for lane change and that made it all worth the $50 or $60 that it costs.

 

Let's see those wheels on there.

 

I’ll second the diode dynamics tap for lane change. That’s a fantastic upgrade over the stock behavior.

 

I wish there was a way to connect a obd reader to my kenwood radio. How does it connect to yours? Is it via Bluetooth or cable?

 

Are these it? If so, that will be my next upgrade.

Not only that it has a single tap (4 flashes) for Lane change but it has a strobe option for emergency lights. Thanks for the recommendation.

Diode Dynamics SmartTap CF18 LED Flasher Module

$90 Diode Dynamics SmartTap CF18 LED Flasher Module

https://www.amazon.com/dp/B085B9PLHF

 

It connects to my HU via a second built in Bluetooth receiver. My first Bluetooth receiver is being used for my phone to answer calls.

It is very responsive. My rpms and GPS displayed on the screen has no delay compared to the actual gauges.

 

Nice! I also installed an ATOTO S8 and it's been great. Let me know how your OBD2 works after the first couple of weeks. Mine doesn't always turn on (ELM327 clone like yours) and it requires a disconnect/reconnect to work. The Torque app is amazing for what it can grab. May go with a Bluedriver next though, as at least that's real.

 

Nice. If you're open to making another set I'd love to buy them!!!

 

Did truck stuff. Been helping my little brother with the house he just bought and stopped by a buddy's house to do leaves for him while his soccer team is competing in a first round NCAA D3 game.

 

Reinstalled the ‘new webbing’ seat belts today. They are definitely a different pattern and the color isn’t exact but it sure beats a $850 price tag for OE belts. Overall I’m happy and thrilled that my clothes won’t get torn up anymore from the shoulder belt.




they look thinner in the pictures but are the same width.

 

Bout 900 bucks later, my boy’s front brakes are done. Toyota handled the labor and gladly took my money for OEM parts

I know we all about that DIY life, but the house and 2 acres got the better of my time, and I completely neglected the 05 since my boy has been away. He was always the one who let me know when things needed to get worked on, and keep me up to speed on the Tundra. About 245K on the old girl, 900 bucks towards keeping her on the road, I can deal with.

 

Finished wiring my Auxbeam switch panel I won at T2S. So far the compressor and the two ditch lights are wired in and it works great! @des2mtn send me your address and I’ll send that seat bracket switch mount if you want it.

 

sweet

 

I have had my ODB2 connector for a year and no issues so far.

So many gauge themes and options you can select from Torque.

 

Had to go on a call last night, first impressions of the diode dynamics pro with flood optics; they suck! The light it scattered way too much, the headlights seem to be brighter than the floods.
So I’ll look at getting a spot or driving combo lens to swap out

 

A few days ago I decided to pull the alarm that was on my truck when I purchased it. A 2 way scytek. Replaced it with a compustar 7900AS with remote start. I regret it after I started it lol but saved me a lot of money. They are expensive where I live.

 

Did you have the “lazy” retractor issue with those? We’re they able to fix them?