C4 Fabrications prototype Tundra bumper

That’s part of the reason I went with the hybrid version, I mounted 2 sets of diode dynamics lights no problem and still have room for more

 

I almost wish I didn't find this thread. Anyone want to buy an SSO Slimline Hybrid bumper? lol No seriously. Northern Virginia.

I'll be keeping my eye out for a C4 BF sale this year.

Does anyone know if there is a remote controller extension plug - like Warn makes - for a Smittybilt Gen3? I looked but didn't find one. I'd rather not move the entire control box, and instead do what @El Two did on page 34 with mounting the plug extension inside the fog light well. Great job with that Lisa. What kind of hole saw did you use?

Don't really want to get rid of my DD SS3's, so looks like I'm gonna fab a bracket. Thanks for all the ideas in this thread.

 

Thanks! . . . I used a Milwaukee 3/4” bimetal hole saw and a little cutting fluid. It took awhile, kept having to stop and let things cools down before cutting all the way through.

I was able to use the stock SS3 bracket on the fog light opening. Just drill a couple of holes in the bracket and mount it from underneath. Super easy but there is a balancing act between having the light as close to the opening as possible and yet have enough room to pivot the light for aiming. Here’s a few pics -

 

Yes, yes.
I know it’s a different bumper.
This is what I did with my sensor holes.
Running lights.

$14 LEADTOPS Eagle Eye LED Lights, 10-pack DIY 12V Ultra thin 23mm Eagle Eye Bulb Fog Tail DRL Daytime Running Lights White Kit for Car Motorcycle (White, Black)

https://www.amazon.com/LEADTOPS-10-pack-Daytime-Running-Lights/dp/B01N30U3CY

$8 Nilight - 50038R 10 Pack 12V Car Add-a-circuit Fuse TAP Adapter with 5 Amp Low Profile Mini Blade Fuse Set for Cars Trucks Boats,Blue, Red, Black, Orange

https://www.amazon.com/Nilight-50038R-Circuit-Adapter-Warranty/dp/B07T8LRSH7

 

Sweet! Thanks for posting the pics of the SS3 mounts. I'll give that a shot. Mine didn't come with mounts (they're sitting in the OEM brackets right now) - I'll have to get a hold of DD to get a pair.

 

Sweet thanks man. It'll likely be a few months till I pull the trigger on the bumper....I've made a note to contact you for the brackets

 

In case anyone else was wondering. I emailed Smittybilt (they're fast - they replied in 8 minutes), and they don't make an extension for the remote. I'll likely be relocating the control box.

 

People with a BD light bar in their overland bumper - is there enough room between the light bar & bumper to fit BD’s snap-on light covers? I kinda doubt it, but hoping there’s room. The covers are req’d in my state.

 

sorry for the late response. It fit just fine with the control box on top

 

What winch are you all running?

 

Smittybilt XRC Gen3 12k here.

 

Warn evo 12s. Fits without any control box relocation.

 

Warn Zeon 12-S, and yes had to relocate controller.

 

You may be able to get them on, but it would be extremely difficult to take them off.

 

Anyone compare this to the cbi hybrid bumper. They look identical. Wondering any differences

 

Very similar as mentioned but from the research that I did, it seems some people have had issues with CBI on two things:
1) Alignment and bumpers either not lining up to mounting holes properly or once mounted, the not being straight / even on the truck.
2) They ship their bumpers powder coated and some have had issues with scratches / chips during the shipping process

 

Warn Zeon 12-S. Did not relocate controller.

 

Anyone hear about or get an email about a Labor Day sale?

 

Been waiting on that.

 

Can anyone verify that you can use a Bad Lands Apex winch with this bumper?

 

Ill be finding that out in october when my bumper gets in. I have an Apex12000 and ordered c4 overland bumper

 

I relocated my vr evo 12s control box because it looked like it sat too high when I installed it on the bumper. Should have asked in here first lmao. Oh well I already had all the cable so no cost anyway

 

It looks like it has the smart sense front sensor in the lower grill...

 

Squirt

 

Looks good what winch did you go with