NSV Knight Rider

anyone have the original wiring diagram ?

 

I have it. Can I attach a PDF? I will try. If not PM me and i can email it to you.

 

prefect thanks !
mine arrived today, they removed the strobe. im going to try the original pinning

 

If you do the original pining it will give ya strobe but the abilty to turn your drl lights with switches will be lost your drl switch become strobe it switching pin 3 to 8 or reverse its opposite of new instructions

 

thats the info i was looking for, thanks !

 

No problem good luck

 

Funny because I am looking for the actual schematic of the NSV, not the install PDF. There seems to be some guarding of this information. I want to integrate to the NSV with both a Switch Pro and factory wiring and diode isolate them from each other so that they work both independently and discreetly.

Has anyone pinned out the NSV harness and documented it?

 

installed my nsv today. i plugged in the 2 and 9 and then put 8 in 3.
everything works but the dlr on the light bar and i have the strobe feature.
nice light took about an hour to install. swipe works with the alarm.
watch the updated video.
i will upload some picture when the sun goes down

 

Anyone know if the switchback resisters on my drl's would effect the drl on the nsv ? @Headlight Revolution
2014 - 2017 Toyota Tundra LED Front Blinkers Kit
LED Bulb Style:
White/Amber, Switchback Function

 

Did you figure this out? I'm thinking of doing the same thing and wiring an alternate control to my spod.

 

I have.
I called Jenson @ NSV and he helped me to identify all the wires and what they do, but there is no schematic available due to knock off copy protection of their products. He was happy to discuss things with me, but unable to send me anything.

 

2 years later and ready for another nsv install.

 

????? What are you installing now?

 

Nsv night rider light bar on my 2021 trd pro. I didn’t save the one on my 2019 when I traded it in

 

Nice I think I am going to pull the trigger on one also. Were you able to every get the ability to run your DRL without the lightbar being on or loosing any function?

 

i changed out the 3 pin for the 8 pin when pinning the wires last time.
I lost the drl but was able to have the strobe function
I would rather have the strobe then the running lights.
The light bar only comes on when you have high beams on the way it hooks into the factory harness.

 

Do you lose you DRL function on your headlights if you wire it normally or just the auto headlight feature? And just to clear this up the light bar only comes on if you switch/turn it on correct? I dont have to worry about it being on all the time or on if I just have my normal headlights on?

 

The drl on your head lights are not effected. The light bar needs to be on at the light bar switch with the high beams on for the light bar to work. The harness for the light bar plugs into the connector for the light switch in the steering column. If the switch to the light bar is off high beams work normal.

 

I didn’t have auto high beams on my 2019. I did notice if the head light switch was on auto the light bar will not work. Hope that helps