What have you done to your 2.5 gen Tundra today?

Done! The wife even approved of the vinyl delete. Also, @Pillslinger we very clearly have similar styles (nice wheels).

 

Crazy how much a few hours change the look of the truck hey? Those look awesome. So far just washing as normal at the wand wash in town

 

I ended up getting the white driving ones. Plan to sync it with high beams for better visibility at higher speeds.

 

on the fence still, white smarter but in the winter the yellow looks so nice on the snow

 

Do what I did, get the DD amber fog lights where your factories are, they are much brighter than OEMs.

 

Installed my Charvonia tie downs…but can’t get the picture to load.

 

Brake line extension bracket.

 

Does the front sway bar come with new stabilizer links or did you use your current ones?

 

Pretty cool! Looks good! I’m looking into the delete kit now.

I just put black TRD shifter. My first mod on my new tundra.

 

I took my oldest to the woods for an afternoon of shooting.

 

It’s so much better with all the chrome gone! Where are you located in the Bay Area?

 

Debadged the SR5 and added Tufskinz matte black 'Tundra' inlay to the tailgate. Then opened second beverage followed by my ‘merica chevron. Time for one more.

 

Thanks. I think you’d be happy with the whole kit. I’m finishing up the shifter trim and cup holder trim tonight.

 

South!

Nice Job Kato! Those inlays are next for me.

 

Is that shifter roughly the same size as the factory one? It looks giant.

 

NICE! Man that looks awesome on the DC. Well done sir.Totally changes the profile. Love it. And of course... love those ICONS!!!

 

Finally installed my diode dynamics ss3 ditch lights with sdhq brackets and diode dynamics 42" light bar package. Note: harbor freight light harness plugs directly into diode dynamics lights.

 

Here you go.

MJVINYL 6FT x 5FT Premium 5D HIGH Gloss Black Carbon Fiber Vinyl Wrap Bubble Free Air Release 72" X 60"

This is the 5D carbon I bought. The pics on the listing are pretty spot on to the look in person.

The other carbon I used was Sott carbon. It had a lot of hype a few years back. It's a printed version that is supposed to look like the tight-twill, square pattern of the carbon used on the interior of exotics like Ferrari's and Lamborghini's. It looks good from a distance, but within a few feet, you can see the print.
I've seriously considered removing it and replacing with a forged-carbon or the black-gold carbon...which is also a print, but the black-gold looks much better than the Sott IMO.

In case you're wondering, I did not use the 5D on the center surround for two main reasons. 1.) I wanted a little different pattern/ color, and 2.) the 5D does not do well on parts with multiple shapes/angles like the center surround. The flatter, more subtle curves are fine.

Here a few links of my steering wheel, center console and trim work and after reinstalled.

 

Good to know about the Harbor freight harness!

 

Yeah I was surprised and the quality was very good. The quality of the HF wire harness was way better than the Amazon Nilight ones ive bought in the past and a bit better than the diode dynamics harness.

 

Dang it, I could have saved myself $25 if I had known that. My dumass cut the wrong end off of wiring harness when I was wiring my ditch lights. Thanks for heads up though.

 

In your neck of the woods I would go with yellow for the fog and snow. JMO

 

Heading up to Wyoming at the end of next week so I figured I would change the oil. Second oil change at 13k, went with Amsoil 0w-20 and an OEM oil filter. Also cleaned the TRD air filter for the first time. I bought a paper filter so I can drive it while the filter dries. It should be a fun drive on old highways with very little traffic.

 

New 3D dual layer decal..





DIY Video
https://www.youtube.com/watch?v=J1mOUsbuJFA

Decals Link on Amazon: https://amzn.to/34zouYO

 

Installed my

$150 Rexing V1P 4K Car Dash Cam 2.4" LCD 2160p Front + 1080p Rear Wi-Fi 170° Wide Angle Dual Channel with Rear Cam, G-Sensor, WDR, Loop Recording Mobile App Supercapacitor

Rexing V1P F/R dashcam. I'm still not sure why but was a huge pain trying to read voltages off of the fuses to see what was constant and ACC power. I ended up using the CIG fuse for ACC and replacing the 25A S/ROOF fuse with the 15A supplied (I don't have a sunroof). Also cracked my B pillar trim trying to pry it to get room to run the rear camera wire, oops. Handle is still tight and can't really see the crack... Also I'm really not sure what keeps these headliners up, the edges pry away pretty easily, but seem to pop back easy too. Rear is a little low res but should do the job if the footage is ever needed. The footage shots are photos of my PC monitor so they look kinda meh. I tried to put the camera up higher on the windshield but the black textured sunshade stuff didn't let the suction cup stay. Ran the rear camer wire up the edge of the headliner and followed the door seal.

 

Pulled three round bales today. Total weight with trailer was probably around 6400ish

 

In case anyone was looking for the link.


https://www.amazon.com/dp/B08T6D6GK1/ref=cm_sw_r_sms_awdb_imm_F1JB0EXW59GW6BV0JYGZ

 

Good man!

 

Today I finally decided to add a shock sensor to my factory alarm so far are working good and it was pretty easy to install. it just cost me 29.99.