What have you done to your 2.5 gen Tundra today?

VLED bedlight bulb comparison... Brake lights need some kind of adapter so going to try auto parts store

 

@RainMan_PNW - Thanks Casey. The button remains in position, either stays pressed or extended. It is a push button that when pushed mirrors are folded and when extended mirrors are unfolded. So once it is turned off and pressed to unfold then the truck knows to unfold when started. Because I have both 2nd Gen and 3rd Gen I just checked and they both function the same.

 

theres an adapter that I got when I bought mine from headlight revolution

https://www.headlightrevolution.com...-1000-lumen-1418TUN-LED.REV.1000_2?quantity=1

 

You should re-use the stock bulb socket. The new VLEDS harness should plug right in

 

It looks like it can plug into where the bulb goes

 

Before and after

 

Replaced tech BuiltRight Industries Tech Panel with the Greyman Tactical 11x6 RMP panel, makes for easy and convenient storage

 

Which VLEDS LED bulb did you use?

 

Ok. Then I’ve got a hunch that the DPDT relay would work basically that same way it does with the non-memory switch, except you’d need one in each door. Basically, you’re setting up a relay so that when the ACC is on, the wiring uses the “stock” configuration (based connects the factory wiring per the factory setup), but when ACC is off, it sends power directly to the motor to fold the mirror.

 

This happened on Thursday. Damn muddy jobsite.

 

I used mine to carry the kids fishing. It was little man's first time and he had a blast!

 

I replaced my faded sun bleached spyder headlights with dead bugs in it.

I got new super spyders (Recon) headlights

 

I needed to make some brackets to mount my amber spot lights, but didn’t want to buy the brackets available by a certain company. Originally I used pvc mounted to the crossmember, but they just bounce like crazy.
I removed the air deflectors, and started with cardboard, utilizing two of the points and a stud on the crossmember. After making the template, I cut them out of 3/16” aluminum, bent and brazed the bends, and painted flat black. Super sturdy now, they don’t move at all.

 

Just got my truck back from @dcsleeper408, thanks for another great install!

He installed new 6112s (pre assembled at 1.9"), 5160s in the back, and my new wheel caps. He also put in a strut shim to add 1/2" to the drivers side and the front is dead even side to side. (And diagnosed leaking cam shafts, at least the powertrain warranty is still in effect.)

When I bought the truck it had some big strut spacers up front which I wanted to get rid of. Like Mark predicted, after putting in the 6112s, the truck is a touch nose high now. Next I will hook up my travel trailer to see how much higher I need to raise the back up. Just looking for a level ride when towing.

Thinking of adding an HD Roadmaster Active Suspension and then seeing if I need a small shackle or not.

Final numbers (fender to center of hub): Front Driver = 24 3/8", Rear Driver = 23 5/8", Front Passenger = 24 3/8, Rear Passenger = 24"

 

My truck was towed away from the visitor parking lot only because my daughter forgot to extend my parking registration.... lol, costed me $250 to retrieve from the compound. Ouch!

 

The Lady had a spa day today... Full detail

 

The red ones that are $180

 

Thanks - waiting for the 25% off sale.

 

Is that something they do often? I will buy more for other places if so.

 

I think it is Fourth of July and Black Friday. Spent a bunch last Fourth of July and planning on more this time.

 

I have Vleds in mine. I have the V6 Triton for my brake lights. What did you purchase?

 

Beautiful Rig...
The AT3's look even better in person....Ask me how I know!!

 

Ok after continuing the thread, you have the V6 Extreme. You still use the bulb socket and it plugs into it.

 

They would be a hell of alot brighter with lenses that weren't blacked out.

 

Now Line-X those flares lol.

 

He has the V6 Extreme. His lenses are blacked out or they would be a hell of alot brighter. The turn as tail system will be going pre-order in a few weeks as well.

 

Sign up for their newsletter and you will get emails when they have sales.

 

Installed front and rear BBK this week.

 

There is a shitload of Tundras here in Tampa and I still have not seen a single Lunar Rock.