1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

DIY: Fix for whistle after adding high flow air filter

Discussion in 'General Tundra Discussion' started by TruckyTruck, Jan 7, 2014.

  1. Mar 23, 2021 at 3:30 PM
    #61
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    I have this high pitch whine at about 1500-1800 rpms then goes away. Extremely annoying. Had it with my RC cai and now with my SABM and K&N. I’ve had the new gasket without the filter. Could it be the hole in the bottom of the airbox to drain water? Im considering siliconing all around the SABM openings.
     
  2. Mar 23, 2021 at 3:32 PM
    #62
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    I have a feeling it is from the gap in the intake manifold right behind the throttle body. If you take the throttle body off you will see where the two pieces of the intake manifold were bonded together.
     
  3. Mar 23, 2021 at 3:38 PM
    #63
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    I’ll check it out tonight. Is there a fix you would recommend for that? Jb weld or tried and true duct tape lol
     
  4. Mar 23, 2021 at 3:45 PM
    #64
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    I haven’t had the guts to do anything about it because of the location and heat cycles whatever material I would put there would go through. I personally have just been trying to get used to it. That being said there is probably some epoxy that will handle it no problem
     
  5. Mar 23, 2021 at 6:10 PM
    #65
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    I tried to listen and it sounds like it’s coming from the airbox. Damn electronic throttles not letting me check solo. I’ll have to get someone to help tomorrow. I did notice a gap at the bottom corner. Not sure if this is due to the K&N. If it is the problem a inch space to raise the airbox might fix it. If it is what you said some foil tape would probably be best.

    7DFBD326-85F5-4872-9A56-4FEDB4589F12.jpg
     
  6. Mar 23, 2021 at 8:42 PM
    #66
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    Let me know how it goes tomorrow. I remember noticing that gap with my KN filter, seems like it might be a tiny bit taller than the stock. If you have the stock air filter still it couldn’t hurt to compare. I unfortunately don’t have the stock air filter anymore
     
  7. Mar 24, 2021 at 2:48 PM
    #67
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    So I noticed I can only hear the noise above 4th gear at the above RPMs. I also no longer have a stock filter. I tried ratchet strapping the lid down and it didn’t help. I’m going to try high temp silicone the entire SABM and foil tape the area you mentioned tomorrow.

    edit: I’m going to try just the foil first since I had this issue with my RC CAI.

    1350DEDE-6AB8-4F48-B907-53F20773F2BD.jpg
     
    Last edited: Mar 24, 2021
  8. Mar 24, 2021 at 6:49 PM
    #68
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    I can hear mine in any gear, it is just dependent on throttle load.
     
  9. Mar 25, 2021 at 6:12 PM
    #69
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    So I can hear mine with stock airbox with K&N filter. SABM and K&N filter. RC CAI. Original gasket I cut the screen out. Relaced gasket with Sequoia one. Wrapped Intake with Foil Tape. Still hear this fucking noise lol wtf
    88B9123B-A136-45D1-852B-61FC685AEA3C.jpg
     
  10. Mar 26, 2021 at 8:37 AM
    #70
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    did you see the gap I was talking about behind the throttle body inside the intake manifold? You would have to take the throttle body off to see it
     
  11. Mar 26, 2021 at 9:20 AM
    #71
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    Yes. You’re talking about where the two pieces of plastic connect or form together. I sealed any possible leak from the outside. I’m giving up on this lol. Next project is AIP relocation.
     
  12. Mar 26, 2021 at 9:25 AM
    #72
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    There would be no leak from the outside. What I am thinking is that area creates the whistle as the air rushes over the gap inside when the throttle body plate gets to the certain right position.
     
  13. Mar 26, 2021 at 9:28 AM
    #73
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    This is what I am talking about:

    upload_2021-3-26_9-27-20.jpg

    My theory is that when the throttle body opens are a certain position it creates a whistle due to the edges of the gap. This photo is from right behind the throttle body
     
  14. Mar 26, 2021 at 9:32 AM
    #74
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    Now I get what you’re saying. That makes total sense. I’m definitely not going to mess with that being the inside and all. It would be nice to find some sort of sleeve to slip inside. Or maybe one of those TB spacers would change how the air flows over that gap.
     
  15. Mar 26, 2021 at 9:35 AM
    #75
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    I agree that it's a little scary to do anything inside there, that's why I was saying earlier I was scared to do any sort of epoxy or something to fill that space. A throttle body spacer might not be a bad idea! I am thinking this is a culprit because the way the throttle body opens it would direct the air straight down over those ridges.
     
  16. Mar 26, 2021 at 10:20 AM
    #76
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    Ever since I ported and polished my TB (few days ago) I can only hear the sound in certain gears. So a spacer may be the fix.
    65F8CC28-3DA7-4D65-8C56-A4DBE1735495.jpg
     
  17. Mar 26, 2021 at 10:36 AM
    #77
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    Sitting Sideways likes this.
  18. Mar 26, 2021 at 12:13 PM
    #78
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
  19. Mar 26, 2021 at 12:43 PM
    #79
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    It’s been ordered. I’ll report back with results when I get it.
     
  20. Mar 28, 2021 at 3:58 PM
    #80
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    Awesome! Thank you for sticking with it, I had basically given up. Even if it doesn't fix it you will make a little more power maybe!
     
  21. Mar 31, 2021 at 2:41 PM
    #81
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    Got the spacer today and installed. Won’t be able to test it out until later tonight or tomorrow morning. Hopefully this is the answer. :fingerscrossed:
     
  22. Mar 31, 2021 at 4:18 PM
    #82
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    Fingers crossed!
     
  23. Mar 31, 2021 at 6:12 PM
    #83
    ZPhilip

    ZPhilip Custom title here

    Joined:
    Sep 20, 2019
    Member:
    #36383
    Messages:
    969
    Gender:
    Male
    First Name:
    Philip
    West Chester, PA
    Vehicle:
    2015 Platinum Super White Crewmax
    Harrop supercharger, TRD Pro Fox suspension, CB +1 shackles, 295/70-18 Toyo ATIII, TRD Pro forged rims
    holy crap I remember when this video came out. Always makes me laugh
     
  24. Mar 31, 2021 at 7:03 PM
    #84
    Charvonia Design

    Charvonia Design Enthusiast-Owned Small Business Vendor

    Joined:
    Feb 18, 2019
    Member:
    #26282
    Messages:
    674
    Gender:
    Male
    First Name:
    Keith
    Huntersville, NC
    Vehicle:
    2024 TRD Off Road Solar Octane
    Typically a TB spacer creates a whistle, so I’m interested in hearing your results.
     
  25. Apr 1, 2021 at 8:55 AM
    #85
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    Okay the high pitched whistle is gone. Now I have this annoying turbo sound lol. If I port/polish the spacer that turbo sound. So the next step is try that or go the jb weld route. Anyone know if jb weld plastic actually welds or is it more like a bandage?
     
    Sitting Sideways likes this.
  26. Apr 1, 2021 at 9:01 AM
    #86
    Sitting Sideways

    Sitting Sideways Probably stuck somewhere

    Joined:
    Oct 8, 2020
    Member:
    #53323
    Messages:
    154
    Beaverton, Oregon
    Vehicle:
    2021 White CM Tundra TRD Off Road
    Icon IR Coilovers, Icon Delta Joint tubular upper control arms, Icon PB CDC rear shocks, Icon Expansion Pack, Icon Hydraulic Bump Stops, Durobumps front bump stops, TRD dual exhaust black tips, TRD pro skid plate, TRD cold air intake system, TRD pro shift knob, TRD Pro Wheels, Falken Wildpeak AT3W tires, TRD radiator cap, ESP under seat storage, spray in bed liner, bed rail system, SDHQ abs guards, black tundra letter inserts, center console wireless charger, center console organizer/tray, charcoal filter removal, whistle screen removed, RCI Transmission/Transfer case skid plate, and ICON neoprene shock wraps
    I don't know if it has the same effect. I would think there would be lots of different epoxys that would work
     
  27. Apr 1, 2021 at 6:47 PM
    #87
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    Picked up some JB Weld Plastic Bonder and going to try it tomorrow. That turbo sound is obnoxious lol
    C9EAD42E-28D6-483F-ADD7-26A3715017F1.jpg
     
  28. Apr 1, 2021 at 7:13 PM
    #88
    Gray223

    Gray223 New Member

    Joined:
    Jan 6, 2021
    Member:
    #57212
    Messages:
    143
    Gender:
    Male
    Vehicle:
    2014 Tundra Double Cab Limited
    I also bought the sequoia gasket and now have an even louder whistle then before...it almost sounds like a very faint turbo spooling noise. But it only occurs at a certain rpm/loud between 1500 and 2k.

    I would not advise putting jb weld inside of your intake tube, if it happened to break lose you just sent those pieces in your engine...
     
  29. Apr 3, 2021 at 5:38 PM
    #89
    JeffMac

    JeffMac 2 Words, 1 Finger

    Joined:
    Oct 31, 2019
    Member:
    #38081
    Messages:
    280
    Gender:
    Male
    First Name:
    Jeff
    South Florida
    Vehicle:
    2015 Black Tundra OVTUNE
    Suspension: Bilstein 6150 Front Max Setting CB Shim 2x Driver 1x Passenger Bilstein 5160 Rear CB +3 Shackles Firestone Airbags w/ Daystar Craddles Engine: OVTUNE - 87 w/ Torque Modifier SABM w/ K&N Filter TB Coolant Bypass Fumoto Drain Plug Wheels/Tires: ProComp Bandidos 0mm Offset Nitto Exo Grappler AWT 285/70/18 Exterior: TRD Pro Grille Spyder Headlights/Taillights Ecoological Bumpershellz LED everything Tinted windows Bakflip MX4 Tonneau Cover K-Source Tow Mirrors Interior: Pioneer AVH-W4500NEX Radio 2x 10” Pioneer Subwoofers 1200W Pioneer Mono Amp 2000W Pioneer 4 Channel Amp
    I didn’t use the JB Weld. I ported and polished the spacer and still have the issue. Unlike Sitting Sideways my gap inside goes down and around. Took off the spacer and back to suffering.
     
    Damie Street likes this.
  30. Apr 3, 2021 at 8:37 PM
    #90
    Gray223

    Gray223 New Member

    Joined:
    Jan 6, 2021
    Member:
    #57212
    Messages:
    143
    Gender:
    Male
    Vehicle:
    2014 Tundra Double Cab Limited
    I've noticed i can really here it with my back glass slide open (double cab)
     

Products Discussed in

To Top