Anyone have 6112s set at 1.9 with CB +2 shackles in rear?

Looking for images with 6112s set at 1.9 with +2 CB shackles rear or any 1.25" lift rear. I am currently at about 2" front and stock rear; I have CB +2s in the garage... Im thinking +1s would be better but...
I don't tow or carry weight in bed.

 

I did. Sorry I didn’t take any pictures before I changed suspension. But I had about 1-1 1/2” rake with that setup if that helps.

 

Nice truck! What size tires are you running?

 

Thanks. I’m running 275/70 18 Nitto Ridge Grapplers. (33”x10.5”)

 

Great! I just got a set of Icon Rebound rims and I need to get tires. I can't get Wildpeak 285/70r18s so I was worried the 275/70 r18s would look to small but I think they will look just fine. I'm also going the 6112 route with the CB +2 in the back but I'm putting 5100's in the rear because I have to same money somewhere and realistically I don't do a ton of off roading. Just the streets up here in Canada..lol

 

That looks great. Thanks. Perhaps I will put those +2s on. Do you know if the shackles will hit exhaust- I have a resonator as well.

 

Hate to ask you but, do you have measurements for front? From center of wheel to wheel well? I will will buy you a beer when/ if we ever link up, and that would be cool because your boat is badass. Im really digging the stance you have with the +2's- my tires are same diameter as yours.

 

I have close to that setup, but have the 6112s at 1.9 with CoachBuilder +1 shim (adds .5" front) and 1.5" CB Shackles in the rear.

 

You’ll be fine. The resonator only comes into play if you’re adding a big spare tire underneath. The leaf is about 2.5” above the top of the exhaust. I’ve wheeled mine hard and never hit.

 

No prob. Here it is

LF 24.25”
RF 24”
LR 25”
RR 25.5”

I do have 1 CB shim on the driver’s side

 

Thanks again and great pics. I actually have driver side at 1.9 and passengers at 1.3 but it sits just shy of 2". Im gonna measure tomorrow-it was raining here all day...

 

I’ve finally got a set of 6112’s on the way. I am planning to run the same 1.3/1.9” settings.

Just checking in to see how it’s working since it seems like a somewhat unique setup…but it makes sense to me.

 

I have 6112s at 1.9”, shim on drivers side, and +2 coachbuilder shackles.