What have you done to your 2.5 gen Tundra today?

I did my reverse lights and cargo/3rd brake lights with replacements from headlight revolution, LOVE THEM...also did the Morimoto head lights and fog lights and interior kit.

 

Thank you!!...heres everything I used, ran me about $400 total and honestly if I didn’t do three full coats on the entire truck you can easily get two vehicles from this kit… I have some of everything left over even after the three coats

Ceramic Kit- https://dura-coating.com/products/professional-ceramic-package

Foam Pads-

$26 SPTA 5Pc 5.5" Face for 5" 125mm Backing Plate Compound Buffing Sponge Pads Cutting Polishing Pad Kit for Car Buffer Polisher Compounding,Polishing and Waxing

https://www.amazon.com/SPTA-Backing-Compound-Polishing-Polisher/dp/B07STT35FF

Applicators-

$26 Autofiber [Saver Applicator Terry] Ceramic Coating Applicator Sponge | 12 Pack | with Plastic Barrier to Reduce Product Waste. (Blue/Gray, Mini)

https://www.amazon.com/Applicator-Microfiber-Sponge-Plastic-Barrier/dp/B07H4SNLPF

Iron X- https://www.amazon.com/CarPro-Lemon-Scent-Liter-Sprayer/dp/B00FEL30R0

 

I doesn't really matter since you have adjustable collars...check the height after you put them on and adjust as necessary.

 

Replace the rotors and brake pads with Genuine Toyota parts cost $288 for Rotors and $99 for the pads and shims. Took me 4 hours to do the front and 2 hours for the rear. Quiet as a mouse now, no more noise at 49K miles.

 

Damn! Come do mine. I installed Autolocs today....the wire colors were definitely different than yours.

 

Yeah, I just didn't want to mess with them. Just want to put them on and be done.

 

Significantly more annoying sound. Not embarrassed to lay on the horn anymore.

 

Nice!...yea I’m thinking because my Platinum already has the auto up/down on the passenger door the wiring may be different on other trims...how about the back 2 doors, they different???...I would think they would be the same

 

I found this post #98 and it matched my wiring colors. https://www.tundras.com/threads/autoloc-auto-window-up-and-down-project.41365/page-4

 

Yea the rears are the same then, so it’s just the passenger side door that’s different...has to be cause I have a different switch on the Platinum with auto up/down...but the rears are identical

 

I have 1325 miles , did my first oil change , swapped over to the metal oil filter housing , installed the stahlbus in place of the oils drain nut for easy future oil changes . I have been using stahlbus on my 2012 Toyota Highlander, ever since it new , no issues whatsoever, and I have 100k miles on it. The skid plate on my 2020 Platinum is a PIA , may have to look for TRD skid plate, with reasonable shipping charges.

 

. Its all good. Can't complain for $100 shipped for all 4.

 

@CorsoTundra are you lifting the back at all? If so, how much?

Please post pics when you're done!

 

Are you looking to lift? I have the same coilovers and 2 inches of lift in the rear.

 

Ditched the plastic oil filter housing for the aluminum counterpart along with an oil change. Gave it a much needed clean up, and removed the X-Pel from the sides. X-Pel held up great (2 years 30k), replacement should be here by the end of the week. I have new transmission fluid here but I’m out of steam for the day. I also need to do a little research on how exactly to service the transmission. Any help there would be appreciated.

Before, notice the small black spots or would be chips.

After, not a spot on it.

Even cleaned the engine bay.

 

Replaced the motor on my driver's side door lock actuator. The lock would stop working every once in a while. Same thing happened on my Tacoma when I had it. Spent 5 dollars on an electric motor for it and replaced it. Saved a lot of money. While I had the door panel off, I went ahead and put some sound deadening on the door as well.

 

Great job Patrick.

 

Thanks @BlueRibbon4x4 for posting this mod info and answering all my questions. Pretty straight forward process. No mod pictures taken. See BlueRibbons build thread for that stuff
Really happy with light placement and illumination.


Edit to add picture later in the night. Really happy with this in person.

 

I'd guess not. Not looking at it right now, but what I can recall from memory, I don't think they come out that far.

 

Nice garage too!

 

That blue on blue!!

 

Swapped the silver interior door handles out for OEM black ones. Silver ones are for sale if anyone is interested btw.

 

Have this ole girl a bath today!! She was dirty.

 

i asked for mine to be set at 2” initially from Toytec because I wasn’t doing anything to the rear at that moment, but mine were the boss 2.0 and the adjust from the bottom. It’s supposed to be a 2/1 ratio (1/2” of threads = 1” of lift) but when I put mine on they were set to 4” of lift so I had to back them way off....so they might have just adjusted mine in the wrong direction or something.

 

Always interesting to see what other folks carry in their door pockets. Looks like you’re well prepared for a number of activities. I have that same tape measure - it’s worked great for 10 years.

 

I keep a little bit of it all in there! Those are great tapes, to bad they quit making them!

 

The better half and I ventured out for an impromptu trek through Bulldog Canyon, where Mother Nature decided to leave its mark on the truck with some pinstripe action. The better half had a blast but she was not amused with the scrapes from tip to tail on both sides of the truck, to which I laughed and said...


Woke up and assessed Mother Nature's handiwork, she left some really good ones, a full wash and single step paint correction removed 95% of the pinstripes and resealed with paint sealant. In my haste to revive the paint, forgot to take before pictures but here is an after shot of the worst panel.


and a front quarter view of clean truck.


Realization, full stock platinum can do these types of trips, but really needs some upgrades to make it a bit less nerve racking...factory 20s with no sidewalls, stock suspension and no real undercarriage protection needs to be addressed...

-Jason

 

Got the Toytec shackles to lift the rear 1.5"

 

Sounds like an adventure

 

My god is that an old lever lock stanley? If so I've got one of those that stretches back to the mid 90's! One of my favorites.