2006 toyota tundra sr5 double cab

I own first gen tundra,Great truck love the price because I own it,Hi to all vt..

 

Welcome from SoCal

 

Hi back, From So, Cal
Im, hoping some one can help me with any ideas,in my 2006 toyota tundra sr5 double cab,I installed fog lights and added leds 9600 bulbs to factory harness, Also Upgraded Stalk with fog switch from toyota ,Had Toyota dealer ship install. Fog relay at back of cabin fuse box,Only thing that happens when I turn on fog light switch is it turns on high beam head lights only No fog lights, Also I have upgraded headlights to led bulbs as well if that matters,Any ideas , Thanks very much in advance,Vt

 

Welcome aboard from The PSW.

 

Thanks vt

 

Welcome from Nevada

 

It's actually a fairly common problem, you need resistors. Post I found

Hi Haze134,
you need to buy a resistors for balance the loads in the circuit and can work the relay of the fog lights.

You can find this on ebay for 15.95usd
2x A10 EMC 9006 Headlight Kit Canbus LED Decoder Load Resistor Warning Canceller




$19 2x A10 EMC 9006 Headlight Kit Canbus LED Decoder Load Resistor Warning Canceller
https://www.ebay.com/itm/2x-A10-EMC...ash=item41b3109cb3:g:1bwAAOSwLnBX2dRL&vxp=mtr

I hope this solve your problem my friend, i was the same problema few months ago with my powerful tundra 2000

 

Do these plug directly into Fog lights Thanks in advance,Vt

 

Thanks I will try this,Thanks for the help
Vt

 

Are you saying that the fog light switch turns the high beams on or that the fog lights just don't work with the high beams but work fine with the lows? If it's the latter then that is perfectly normal. Factory fog lights only work with the low beams and shut off with the highs.

There is a simple "Anytime Fog Lights" wire mod on the 2nd and 3rd Gens, don't know about the 1st Gens.

 

Fog light switch on Stalk on High beam head lights only, if I have head lights on low beam for instance, and I turn on fog switch it brings in high beam head lights only, nothing else
Thanks in Advance, vt