Bilstein 6112 Height Chart

Found this chart online at toytec.com. Can anyone verify if the heights are pretty close to their setup after installation. These heights are without any shims as well. Why the difference between 4x4 and 4x2. Thanks...

 

Less weight upfront for us 2wd guys. Never saw that chart b4, thx. I did get a solid 3" on the front of mine, wrote the #'s down so for curiousity I will check against the chart.

 

did you use any shims on either side for the solid 3"??

 

No shims and my truck came out level side to side as well, had a very slight lean on df stock

 

What were your numbers before the lift?

 

Sorry 4 delay, #'s before 31 1/4 " lf, 31 3/8" rf

After 34 3/4" both fronts. So right at the 3.3" the chart says.

All measurements from bottom wheel lip to bottom fender.

 

Chart was correct. Did installation today with 1 @BOSS4x4s shim on DS.
Now measures 36" from bottom of rim to fender on DS and PS upfront.
Measures 36.25" on both DS and PS on rear with @BOSS4x4s shackles set at 1.5".

 

Are you running 6112" Option #3 (1.9") or Option #4 (2.5") up front?

What tire size you running in the photo?

Like that stance

 

Thanks. Running it at option 4 and currently have the Nitto TG2 (35x11.50R20). Truck looks a little different now.