What have you done to your 1st gen Tundra today?

What did you put in I put in a Sony xav ax1000

 

I’ve got a 2019 Toyota 86 factory radio

 

Oh sick

 

Every light in my truck including my cluster got replaced with leds I might change the blinkers to incandescents as they are pretty bright and distracting when blinking. Only bulb I didn’t have was for the cig lighter so I took the condom off the factory oem bulb.

 

My gauge cluster is led from
The factory so I’m good there. Everything else will be led soon
Including the switches

 

Awsome the truck at least a 00 model uses like 20 c74s

 

That’s common. Order the hose now before it breaks and your stuck or worse

 

Better photo of the leds, full brightness.

 

Man I like that radio. I hate that my aftermarket radio don't automatically connect to my phone's Bluetooth like factory radios do and I miss having a volume knob with push to mute.

 

I love it, get in the truck and it connects automatically. Give it 30-40 seconds and musics playing
It even reads my text massages to me

 

I'm just glad mine hand hands free calling but I wish it had all that

 

Mine were plug and play. I already had PerfectFit Fogs. No resistors needed. My Katanas did come with a driver pack? of some sorts (about the thickness and length) of a cell phone fold over on itself. I zip tied it to my other wiring.

These new ones do not appear to have this driver? as its built into the bulb.

 

Its a hand model access only site. You’ll need 20 years experience before entering, but I give you the secret code. Just make sure not to get hurt out there. Ok?

Go to toyota parts deal . Com for parts numbers THEN cross reference for better diagrams with your local online stealerships.

 

When is your write up coming?

 

You can make/retrofit using the Partsams bulbs for that cig light.

 

Sweet! We have off untill the 2nd, campus wide shut down, it’s beautiful!
I’m sure you will build something cool with your time off. My rear bumper is a kit from coastal offroad, it should turn out pretty badass once I get it done. I’m off on my frame rail holes by maybe a 1/4” total, so I might try and take pipe clamps(2 facing opposite directions) and slowly bend the rear section of the frame back square or just enough to get my bolt holes to line up. Hopefully after that hiccup it will be smooth sailing for the bumper assembly

 

Thank you... did remove, clean and seal... too cold to run a leak test...waiting for warmer temps...

 

Had not thought of that... next on the list when the temp rises a bit! thank you!

 

Yes... it was in the T3 movie... too old to remember exactly, but I think it came out in 03 or 04,,, all black Tundra Access Cab, special version of the front grill too!

 

Is that a normal fail - the hose leaking with a clamp on it?
I'd just assume a crack in the neck it's attached to.
Do you see that much - the neck cracking? Conversely, do you see the hose leaking often?

 

Damn I can't even find my ashtray's light, its just not there... Also some of my switches have blown bulbs too. I just want to replace with OEM bulbs with the green condoms, anyone wanna sell me a bunch of good bulbs yall removed after doing LED's so I can get all of mine back to working order?

 

On 2004 one has to remove the ashtay frame held on with 2 phillips…..2005 not the same ?

 

Dunno, I was looking for the wiring. Simply pulled the ashtray out and was like.... I see no light...

 

Jacked up the front today with the beast and checked each tire for any movement. First time doing this since replacing the outer tie rods. The side to side wiggle is gone.

Also cleaned up the interior. This stuff has become a favorite for the dash and also works on the tires. Doesn't the dash greasy like armor all.

 

Can I get a YouTube video of these instructions please? Haha. I found em and ordered them last night after looking at pictures of the 2nd part number they match up correctly. Now to see if I can return these other ones unless someone with an access cab (I assume since the headlight assemblies are different/smaller) wants these covers.

 

When I get the backup camera done. Holidays come first though

 

It’s becoming a common sight. Once its leaking like yours if you just touch it hard enough it’ll snap off. Dealers usually stock them.

 

Do you recall what size diameter hose fits into the front diff? I'm gearing up for a drain+fill.

 

I ran a 4’ long piece of 1/2” PVC line down from the upper radiator area. Put a slight bend in it to fit the diff hole angle. Put the funnel into the top other side of pipe and poured like I was doing a radiator top off.

 

Yes they do. Merry Christmas! And Merry Christmas to All! Hohoho!