1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

200 Watt fixed solar panel installed

Discussion in '2.5 Gen Builds (2014-2021)' started by jpbewley, Oct 15, 2019.

  1. Oct 15, 2019 at 10:38 AM
    #1
    jpbewley

    jpbewley [OP] New Member

    Joined:
    Jul 31, 2019
    Member:
    #33937
    Messages:
    82
    Gender:
    Male
    Installed the 200 Watt fixed solar panel on the ARE MX HD Camper shell... It's hard to see and hard to take a good picture of... but that's really the point. My goal was that you wouldn't really even know that it is there.

    I used a flexible 200 Watt panel. It's attached with 3M VHB TAPE. I've used this on several other builds and it holds up great. I routed the wires down through one of the existing screw holds for the roof rails and RTV siliconed in the cable route.

    The whole cable run is about 6 feet. 200 Watts @ ~12 Volts is around 15 AMPS. Given this, I used 14 AWG wire.

    I used the Victron Energy MPPT 75 15 BlueSolar charge controller. On the load output side, I used the Blue Sea below deck panel which has 12 volt power port, 2 USB ports and a Voltmeter.
    image_efb2c3897481f3e547ca5f5f4753baa2f3afa310.jpg IMG_0208.jpg
     
  2. Oct 15, 2019 at 10:41 AM
    #2
    e30cabrio

    e30cabrio I'm e30cabrio, I'm a modaholic

    Joined:
    Oct 20, 2017
    Member:
    #10410
    Messages:
    4,590
    Gender:
    Male
    West Valley, Phoenix, Az.
    Vehicle:
    2010 Crewmax, 2013 Sequoia Limited
    Sequoia LED Headlights! D.T. L.T. headers, dual exh., BDX, S&B intake, 2018 seat skins.
    Very cool.
     
  3. Oct 15, 2019 at 10:43 AM
    #3
    lewi3069

    lewi3069 New Member

    Joined:
    Mar 21, 2018
    Member:
    #13759
    Messages:
    185
    Gender:
    Male
    Vehicle:
    2017 Crew Max 4x4 Sunset Bronze
    Do you have a second battery or does it charge the truck? What is the use case you have for this?
     
    Rex Kramer likes this.
  4. Oct 15, 2019 at 10:49 AM
    #4
    P-Factor

    P-Factor New Member

    Joined:
    Feb 14, 2019
    Member:
    #26094
    Messages:
    1,045
    Gender:
    Male
    Vehicle:
    2018 Tundra Limited Double Cab
    TRD Sway Bar, TRD Exhaust, TRD Cold Air Intake
    Outstanding! Great job with fit and finish! :thumbsup:
     
  5. Oct 15, 2019 at 10:51 AM
    #5
    Jerry311SD

    Jerry311SD New Member

    Joined:
    May 3, 2018
    Member:
    #14997
    Messages:
    801
    Gender:
    Male
    First Name:
    Jerry
    Ramona San Diego CA
    Vehicle:
    05 Tundra
    Thats sweet. I like how you cant realy tell its there.
     
  6. Oct 15, 2019 at 10:56 AM
    #6
    jpbewley

    jpbewley [OP] New Member

    Joined:
    Jul 31, 2019
    Member:
    #33937
    Messages:
    82
    Gender:
    Male
    It's tied into the truck battery at this point. I use the shell for camping and expeditions. It will offset the usage of my fridge, charging drone batteries, camp lights ect. I did a longer post on the shell in my build post here:

    https://www.tundras.com/threads/2019-tundra-trd-pro-overland-build.53431/
     
    lewi3069[QUOTED] likes this.
  7. Oct 15, 2019 at 10:58 AM
    #7
    osidepunker

    osidepunker OsidePunker

    Joined:
    Oct 19, 2016
    Member:
    #4918
    Messages:
    2,998
    Gender:
    Male
    First Name:
    Alex
    SoCal
    Vehicle:
    2013 Tundra DC 4x4
    Full LT, full armor, fully self contained Speed Glamper
    If you have to remove it for some reason, how hard is it to get the VHB tape off???
     
  8. Oct 15, 2019 at 10:59 AM
    #8
    osidepunker

    osidepunker OsidePunker

    Joined:
    Oct 19, 2016
    Member:
    #4918
    Messages:
    2,998
    Gender:
    Male
    First Name:
    Alex
    SoCal
    Vehicle:
    2013 Tundra DC 4x4
    Full LT, full armor, fully self contained Speed Glamper
    which panel is it??
     
  9. Oct 15, 2019 at 11:04 AM
    #9
    jpbewley

    jpbewley [OP] New Member

    Joined:
    Jul 31, 2019
    Member:
    #33937
    Messages:
    82
    Gender:
    Male
    It's a pressure sensitive tape so if you need to take it off, you can. The way I have done it in the past is to take a flat tool, slide it under the panel and give it a twist. Without that... I've been driving MY FJ for years and 1,000's of miles and the panels stay put.
     
  10. Oct 15, 2019 at 11:05 AM
    #10
    jpbewley

    jpbewley [OP] New Member

    Joined:
    Jul 31, 2019
    Member:
    #33937
    Messages:
    82
    Gender:
    Male
  11. Oct 15, 2019 at 11:08 AM
    #11
    osidepunker

    osidepunker OsidePunker

    Joined:
    Oct 19, 2016
    Member:
    #4918
    Messages:
    2,998
    Gender:
    Male
    First Name:
    Alex
    SoCal
    Vehicle:
    2013 Tundra DC 4x4
    Full LT, full armor, fully self contained Speed Glamper
    Thanks man. Yeah I wasn't worried about it coming off, I was more worried about it leaving glue everywhere if you have to remove it. What about hot sun?? You think it'll last and not dry up??? I really want to add solar to my roof but I've been hesitant
     
  12. Oct 15, 2019 at 11:08 AM
    #12
    Windsor

    Windsor New Member

    Joined:
    Jul 8, 2018
    Member:
    #16847
    Messages:
    812
    Gender:
    Male
    First Name:
    Chris
    Oregon
    Vehicle:
    2008 Tundra Crewmax 5.7L
    Seat covers, SnugTop.
    Did you use the 3m VHB primer? I put 2 Renogy 100w flex panels on my parents Airstream. Used the primer.
    Tested a one square inch piece of tape with and without primer. Difference was very big. The piece with primer ended up getting cut down with a razor blade and covered by the panel. The piece without primer came off by rolling the edge back.
     
  13. Oct 15, 2019 at 11:37 AM
    #13
    jpbewley

    jpbewley [OP] New Member

    Joined:
    Jul 31, 2019
    Member:
    #33937
    Messages:
    82
    Gender:
    Male
    I'm two years in on my motor home and 1 year in on my FJ... so far no problems. I give them a little test "tug" every time I'm up there cleaning the panels.. and no issues. They have both seen very hot (Arizona summer 110+) and colder temps (20's). My experience has been that it comes off pretty clean if you need it to come off.
     
    osidepunker[QUOTED] likes this.
  14. Oct 15, 2019 at 11:38 AM
    #14
    jpbewley

    jpbewley [OP] New Member

    Joined:
    Jul 31, 2019
    Member:
    #33937
    Messages:
    82
    Gender:
    Male
    I didn't. I just cleaned the fiber glass shell and back of the panel with alcohol. That's the approach I used on the motorhome and FJ and haven't had any problems. I do test "tug" them from time to time when I clean the panels.
     
    Windsor[QUOTED] likes this.
  15. Oct 15, 2019 at 11:46 AM
    #15
    NoRcptn

    NoRcptn Better than mediocre poster

    Joined:
    Sep 17, 2018
    Member:
    #19520
    Messages:
    1,516
    Gender:
    Male
    NorCal
    Vehicle:
    2017 Platinum
    GFC, Dobinsons IMS, RW's 285/75/17
    Damn that's nice!
     
  16. Oct 15, 2019 at 11:54 AM
    #16
    TXMiamiFan

    TXMiamiFan SSEM #3 and tractor extraordinaire

    Joined:
    Nov 26, 2015
    Member:
    #2160
    Messages:
    25,307
    Gender:
    Male
    First Name:
    Jose
    Houston, TX
    Vehicle:
    2016 White Crew Max TRD
    TRD Pro Grille, ESP Storage, Tailgate Inserts, Line-X Bedliner, Weathertech Floorliners, Wet Okole Seat Covers, 5" Shorty Antenna, Mickey Thompson MM-366 Wheels, ToyTec Boss, 35" BFG KO2 to name a few.
    That is awesome.
     

Products Discussed in

To Top