Help! Bilstein 5100 leveling kit questions.

Looks great.
Love those TSS wheels!

 

Looks Great!!!

 

Damn I have same exact truck! Well any pcs sensor going off since level? What exactly did you go with?

 

Don't forget to install those large washers on the factory bump stops. Two on each side.

 

How does the ride compare to stock? I'm about to pull the trigger on this EXACT setup.

Thanks!!

 

Me too. Trying to decide between one spacer on Driver's side or two on Driver's and one on Passenger.

 

No pcm or traction control issues. I didn’t know about the two washers. The drive is almost exactly the same a little stiffer than before but not bad at all. Do the two driver side shims it will be almost perfectly level. It has between a half and 3/4 rake I’m not sure if that helps the pcm issues

 

Is this something easy I can do in an hour or so or is it something I’m gonna have to realign afterwards?

 

10 minutes and no alignment needed. It just keeps the lower control arm from moving up too high and bottoming out the shock.

 

I’ll do it this weekend

 

Thankyou I thought this was something else entirely

 

I just did my 2015. Ordered it from boss4x4 5100’s and a diff drop. Super cheap and rides great. Ended up finding a busted shock in the back. My set up 5100 on the top setting and a toytec 1” block in the rear. Could t be happier.

 

I’m curious as to why the shop told me I didn’t need the differential drop and the angle doesn’t look bad at all but I see a lot of members here installed the diff drop on leveling kits

 

Looks great

 

The kit I ordered came with it. It was a little bit of a pita to install no room for hands to put the nut one the bolt. But otherwise I did the whole install myself in about 2.5 hours. Just needed a spring compressor. I did the diff drop just to save the boots. I really don’t know it it helps but I had it. Can’t see it hurting other then my hand to install it.

 

Oh and thanks darth.

 

Looks great.

 

nice!

 

This has helped me tremendously. Does anyone have the links to purchase the 5100’s and shackles?

 

https://www.boss4x4s.com/

 

^^^ THIS! Email Darren for pricing.

 

That looks amazing I want that cover too!

 

I have the Bilsteins 5100 as well front setting only at 2.5”. Perfectly aligned with the back. Love the ride. Still doing research on getting taller wheels. Im currently running 285/55/20 but want 285/65/20. Does anyone know if UCA’s add a bit of a lift?

 

Would this all apply for a 1st gen tundra v8 2 wheel drive? Thanks