Driver’s Side Grab Handle...

Am I crazy? I feel like this should line up better. It’s been installed a few weeks now but it doesn’t line up straight on the front window border like the passenger side does. Let me know what you think. Did I overtighten it? It lines up perfectly with the rubber piece on the door side.

 

I don't disagree but it looks just like mine.

 

I had a similar situation.

When the temps rise like in the summer months it should relax the Plastic.

 

Here's mine

 

Mine's a little off as well. Completely forgot about it until now. Thanks for that.

 

Looks like it’s defective. I’ll but it from you at a slight discount

 

Loosen it up a bit, wiggle it around and reseat it maybe?

 

I thought about that too. Glad to see it’s just the way it is. I felt liked I needed to loosen it anyway since it’s a little tight on the fabric at the top compared to the passenger side.

 

Yup, I thought the same thing and was worried I over-tightened. So I tried to back it off, it just made the handle give a bit when pulling on it, so I tightened it back up. So thats just the way it is. Mine looks exactly the same.

 

Where can I buy the grab handle for my 2019 Tundra?

 

You can place a Ram mount on the lower handle mount, removes the Ill fitting cover and a great place for your phone

 

@Roman send him a PM.

 

Jake do you have a link?

 

I got mine from Sparks Parts as it came with the additional parts needed (u-nut and bolt)

 

Yup. I had to get 3 peices total to make it all work. If you're spacing isnt right, the ball mount will spin when tightening, have a few washers on hand for that. Hit me up if you need any further info

Ram Mount Cradle Holder for Universal X-Grip Cellphone/iPhone with 1-Inch Ball - Non-Retail Packaging - Black

$37 RAM Mounts X-Grip Universal Phone Holder with Ball RAM-HOL-UN7BU with B Size 1" Ball

https://www.amazon.com/dp/B0055PH0XA/ref=cm_sw_r_cp_apa_i_oCCvCbH8YG078

Ram Mount Double Socket Swivel Arm for 1-Inch Ball Bases

$27 RAM Mounts Composite Double Socket Swivel & Ratchet Arm RAP-B-200-2U Compatible with RAM B Size 1" Ball Components

https://www.amazon.com/dp/B009SX0J88/ref=cm_sw_r_cp_apa_i_YECvCbFY668HQ

Ram Mount Motorcycle Handlebar Clamp Base with M8 Screws

$13 RAM Mounts RAM-B-367U Motorcycle Handlebar Clamp Base with M8 Bolts with B Size 1" Ball

https://www.amazon.com/dp/B005J43I56/ref=cm_sw_r_cp_apa_i_iFCvCbN8HJT39

 

Thanks for the link. I need this mod.

 

Went to Sparks and according to the sote the part does not fit my truck? Anybody have a comment? 2019 Tundra SR5

 

It'll fit.

 

Normal, all the handles I’ve seen have that slight imperfection/defect.

 

You'll just have to modify it slightly to fit around the air bag wiring. Copy the general shape of the old one after you pull it out.

 

My 2018 SR5 Off-road does not have a drivers side grab handle. Only on the passenger side.

 

You can add it like we all did.

 

https://www.sparksparts.com/p-tundra-grab-handle-kit-pktungrab

 

Sparks here as well.. Caught a sale a while back, comes with the extra hardware that makes it a simple install. Mine is off a bit as well, not as bad as yours though.. The little bolt cover doesn't fit great on mine, popped out once, but its staying in now.

 

Is this handle from Sparks a Toyota OEM part?

 

Yes, but for different years/models. Since Toyota has not changed the design of that pillar, though, it fits just fine in newer trucks. The only thing I had to do to make it work for my 2020 was to cut out the notch (hidden once installed) for the airbag wiring.

 

Mine has a very slight bend. I installed it last year.

 

did these match the color interior? cause i just see tan and gray

 

Why is there so much debate over fitment, color or OEM. The thing will fit up to 2021. Takes 10min to install.