GEN 3 (2022+) Wheels and Tires Photo thread

Clean looking. Getting 35's of those KO2's put on in a couple of days. Any issues with them?

 

275/60/20 Ridgegrapplers on stock 20’s.Peace. D

 

Hey I'm days away from installing the same size wheels and exact same tires. What's your offset? Because the place installing them convinced me I needed a 25 offset or the tires would "stick out too much." Not sure if it's a little poke or they'd be way out there.

 

+25. They stick out just a little bit.

 

Got any pics of how it looks?

 

Parked at a weird angle kinda sloped

 

They don’t balance well at least not 37’s balanced them 9 times not perfect but good enough for now

 

20x9 Fuel Rebel 6's +20mm offset. On 35x12.5R20 Toyo Open Country A/T III's

 

Any poke at all on that? I was going to go with an 22x10 -18 offset but calcs say it would poke a lot. Ended up buying a 22x9.5” at +20 offset with a 305/45r22. Hope there is at least some poke, should be based on the numbers.

 

I'm kinda anal about tire/wheel weight and how it affects MPG. I believe the stock 20 set up ('23 Ltd w/265/60R20s) is about 68 lbs. ea. I calculated this by weighing stock wheels with snow tires I bought from TireRack (and they list weights with the specs of each item.) My snow tire set up weighed 87 lbs/ea. I found the weights of the snow tires (TireRack) and stock tires (Discount) and calculated what the stock set-up should weigh. I did this because the dealer I bought my truck from had installed Fuel wheels with over sized BFG KO3s and my mileage suffered (less than 15 MPG hwy.) I have more info if interested, PM me

 

I just had these Black Rhinos with Nitto Grapplers mounted. Truck came with a 2" lift from the dealer and Fuels with BFGs. That set up yielded less than 15 MPG so I found a lighter combo. I'm going for 18 MPG or better... Sorry about the full truck image -it's wide angle because I couldn't get back further

 

There's roughly a 1 to 1 1/4 inch poke. I had some Black Rhino Wheels 20x9.5 at -18 offset and the shop that did my work was concerned with potential rub using these wheels. Ultimately it wasn't the rub but the amount of poke with those that made me pivot to these +20mm offset wheels. Here's a pic of the poke with the -18mm at x9.5 wheel, where yours was X10, even more poke.

 

looks clean bro. What made you go with 35x11 vs 35x12? Any rubbing issues ?

 

very nice looking tundra bro. Ordered the wescott design pre collar lift kit. Do you happen to know the specs to align after the lift? And also how do you like the ride with the Toyo AT3s? I'm getting the same tires too. Any rubbing issue? Thanks

 

Thanks for that visual, very helpful. That wheel and tire combo looks good you installed. I ended up going with a Vossen wheel in bronze and AT3 tires. Been nervous and excited about the fitment since placing the order.

 

I agree 100%, truck looks super clean.

 

I was between black and bronze. Bronze will look good. Which Vossen wheel, they make some nice wheels.

 

Vossen HF6-4 in Terra Bronze. Using black Vossen lugs as well. 22x9.5

 

Are those the rough country or the go rhino e boards?

 

Rough Country. They are quite tedious to install but I couldn't pass up the 800 price tag they had about 3 months ago.

 

they look good

 

Thanks! Family loves them especially how low they drop. Great quality too.

 

$800 is a steal for eboards.

 

Got 35" KO2's put on with 17" Method 707 0 offset. Installed an Icon leveling kit for the front in order to get the front tires on without too much rub hassle.
Here's the before and after,

 

Looking clean!

 

Hi ya'll. I haven't read all 160 pages, but it looks overwhelming anyway. I just acquired a 1794 Special Edition. I love the wheels (TRD 20" Black with "TOYOTA" Center Caps) but HATE the tires. They're just too small at 265/60/R20. What is the biggest tire that I can not only fit on this rim, but not have any rubbing, modifications, or spacers? Thanks a ton!

 

RC 1.75 level
18x9 +12 DX4 Caper wheels
35x12.5

 

Added the caps to the volks to complete the set!

 

Moto Metals originally powder-coated gloss black from factory, scraped off all that black nonsense, sanded and half ass polished, 2 weekends worth 18x10's -24mm offset master tracks LT275 70 18

 

are these stock TRD suspension? Any rubbing ?