Wiring ID for rewire of Purge and ACIS VSV connectors

Had a squirrel get under my hood and destroy the wiring to the 2 connectors that are connected to the purge and ACIS VSV controllers. I have all of the parts and material to fix the issue but I am having difficulties in finding a wiring diagram that shows the correct rewire. Could someone please look under their hood and give a clue. I have 2 wires to each connector (4 total). 2 of them must be commons as they have the same colored stripe. The other 2 are different colors but I have no way of knowing which wire goes to which connector....or which pin on the connector. Appreciate any help I can get on this.

2007 Tundra with 5.7

 

I am dealing with the same problem. Squirrel or chipmunk got in and reaked havoc. I can't find electrical connectors for the VSV and ACIS plugs. And the rotten little cuss chewed the wires right at the connector so I have nothing to splice to to repair it.

 

As this post is a few months old I can only hope that you got it sorted out. On mine the VSV connector wires are blue w/ black stripe and blue w/ white. the ACIS are blue w/yellow and I'm affraid I can't tell what the other is at the moment. Where did you find parts?

 

Hello, Would someone be able to take a photo of the wires position on the connector at the ACIS? Specifically, which pin is the blue/yellow wire connected to vs the blue/white?

Mice ate everything down to the connector and unclear which wire goes to which side of the connector based on looking at the diagram. Perhaps it doesnt matter?