WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Exactly, Ive never heard of this being done yet and couldn't find anything on it. I examined the location and routing diagrams and then toned it to make sure. All you need is 1' ft of one wire and add a button. I got a rave off road button and opened it up to modify it so it acts as a momentary button (very important), also you don't need a fuse because its only powering 12v 100mah led for the switch. I used the Illumination 12v and Illumination Ground on the Plug not being used behind the button slot I was going to use. Then you need the Pink Signal wire which you'll have to splice off of and a wire to frame ground. Don't ground the signal wire to the illumination ground because of the Dimming feature. the ground for that actually has some voltage going through it to reduce brightness. Four Wires Total. Recap : 1 Wire Splice from Signal (1'FT ), 2 Wires Stolen from plug not being used behind blank (4" INCHES) , Add ground wire to frame (1’). I have a ton of photos on an album on my profile going through the whole process, take a look. Feel free to message me if you need help. I also put comments on some of the pictures in my album explaining things.

 

Started the blackout process - mirror covers by Iron Truss Fabrication
https://irontrussfabrication.com/products/2022-tundra-mirror-covers-with-mirror-turnsignal

 

Started the blackout process - door handles covers by Iron Truss Fabrication
https://irontrussfabrication.com/products/2022-tundra-door-handle-covers

 

Interior Blackout - Steering Wheel

$26 Aunginsy Center Console Steering Button Panel Trim Cover Compatible with Toyota Tundra/Sequoia 2022-2025 Tacoma 2024+ Central Control Steering Panel Decorative Frame Protector Sticker ABS Accessories

https://www.amazon.com/dp/B0BLHCYBQS?th=1

 

Interior Blackout - Center Consol

$16 Aunginsy Central Control Gear Shift Panel Trim Cover Compatible with Toyota Tundra/Sequoia 2022-2025 Truck Gear Shifter Console Anti-Scratch Panel Frame Decorative Sticker Protection ABS Accessories

https://www.amazon.com/dp/B0BZKCBKHT?th=1

 

Cargo X2

 

Interior Blackout - AC Vents
https://www.ebay.ca/itm/314375758687

 

Interior Blackout - Steering Wheel overlay
https://tacovinyl.com/collections/overlays/products/steering-wheel-overlay

 

Project Update - Plug and Play Tailgate Safety Module in Development. This will make it very simple to install without cutting or pulling wires. Just find a ground connection point and that's it. The kit will include the two harnesses (one for the 24 pin computer that has the signal wire and a harness for the existing button wiring behind the blank to connect to and from the new button. I will also make a button for the kit too. It'll give this project more of a brain, safety compliant, and super easy to install for anyone if there is interest. If you're curious what this module will do exactly see the comment posted to the picture of this connecter...

 

That is actually a pretty awesome idea, good job man. I bet you could hit up Meso, Caliraised, and others to sell your kit. Or create an etsy/Amazon store.

 

Shut up and take my money!

 

Kind of want…kind of think reaching into my pocket for the key isn’t that hard…hmm

 

Does the fob work if truck is running?, strangely haven’t tried it

 

sign me up as well

 

Basic, but I like it:

 

Do you think the Soundshield makes a difference? I did a similar product on my old 4Runner, and it was noticeable. I'm 10 days into my Tundra... and it seems so quiet by comparison. Not sure it is worth it.

 

25k oil change with penzoil ultra platinum

 

Basic but absolutely necessary! Best color out there if you ask me

 

Love that camper type conversion. Would love to see that layout…

 

I love that grill guard. I think it’s awesome.

 

I have the stock exhaust with the black chrome TRD tip. What brand/part number… is that dual setup? I love the look. Is there any cabin drone without the resonator?

 

I installed the same black chrome tip. I like your recovery point. I need to look into that. Would love to mimic yours.

 

Tossed on a Du-Ha tote and rack in the bed for my tools, the Gator EFX cover and tail gate inserts to match the TRD pro camo. Felt like the red outline was a little much but it will do for now.

 

I’m sure it could meter a difference but I dunno if I can actually hear one. I did this mainly for mitigating rattles and vibrations since I’m pushing a good bit of power to the speakers

 

Installed the Beat-Sonic PA2T3K amp. Took
About half an hour. Ended up putting the gain at about 60% on the amp itself.

 

Just curious, what are you getting quoted for the entire truck? PPF and ceramic coating?

 

Wrapped the entire top of my cab and camper shell in camo to be the most over the top TRD Faux thing of all time…….



Just kidding. It’s the morning frost.

 

Also some more “basics” but wifey came through and got me the black handle covers to continue my black out theme.

 

Picked up my second key and got on the schedule for the temporary fuel line fix for after the New Year.