WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

I upgraded my interior to a custom Katzkin Leather interior. I also sprung for the heated and cooled option! I’m stoked with how it turned out. I was surprised that they did the center console with red stitching to match.

I also added the TRD pro shift knob.

Before


After

 

OK I am sold - I will install one!

 

I had the shop who did the PPF on my truck also install a PPF screen protector. It’s a perfect fit and it does not show any fingerprints.

 

That came out really good the stitching makes it POP for sure.
Question for you, on the passenger front seat plastic just below where the right thigh would be is that just sunlight glare or is that a stress bruse in the making.

 

Where are you getting your black trim pieces. Thinking about the steering wheel ones

 

New vinyl.

 

New 2024 Tundra Limited

TRD Lift
Ceramic tint front windows
Mickey Thompson Baja Boss AT 285/65R20
Factory 55 Hitchlink & Shackle
Bike Fork Mount for deck rail
RC Hidden Winch Mount
20" Baja Light Bar
Warn Evo 10S
Tacoma Cargo Bed D-Rings (cooler tie downs)
OEM Bed Step
Blackout badge for steering wheel
Debadged Limited badges
Black out lettering tailgate
Vinyl American flag
Headrest Grab Handles

 

Looks terrific, if you don’t mind me asking what was the cost; Katzkin parts + install?

H4L

 

Yes they come pre-painted, just need your paint code. If anyone would like the chrome pieces, please let me know as I am needing to offload them, they are perfect condition. Thanks!

 

Amazon

$26 Aunginsy Center Console Steering Button Panel Trim Cover Compatible with Toyota Tundra/Sequoia 2022-2025 Tacoma 2024+ Central Control Steering Panel Decorative Frame Protector Sticker ABS Accessories

https://www.amazon.com/dp/B0BLHCYBQS?ref=ppx_yo2ov_dt_b_product_details&th=1

$44 Car Center Console Air Outlet Cover Kit Compatible with Toyota Tundra 2022 Sequoia 2023 Center Console Side Air Outlet Trim Cover Center Console Air Outlet Vent Panel Decor Frame Protect Accessories

https://www.amazon.com/dp/B0BZMMVJ8B?ref=ppx_yo2ov_dt_b_product_details&th=1

 

So far it's only been stuff to make the truck functional for me, I've installed cat protectors, Decked drawer system for my tools, and I had the lumber rack from my old Tundra powder coated matte black and Monday I finally had time to install it on the new truck. Next up is tires and a little lift.

 

Air ride or regular?

 

Had the temp fuel line fix performed today. Hope I dont burn to the ground now

 

Dropped it off at 8, picked up at 4pm. Not sure what the recall calls for

 

Thanks man!! I knew I was adding some of the TRD Pro touches (shift knob, dash trim, and the steering wheel is next) and i wanted to try and tie it all together.

Nope, took another look and it seems like it was just a glare or a scuff or something. Good looking out though!

 

It's the little things that make these trucks really stand out!

 

The leather by it self is $1700 for single color, and $2000 for custom (dual color, or your own custom design) and then the heated and cooling is I think $1700-ish on top. Install was included in the price. I caught a Black Friday deal, and I finally got back a check for diminished value from an accident I was in less than 48 hours after I bought it, so it didn’t sting quite as bad

 

This is gonna sound maybe kinda dumb to some of you guys. I own a 2022 Limited CrewMax Tundra (White). It's got the Tail Gate Courtesy Release Button on the Left Side Brake Light. Anyways there have been a handful of times I wanted to drop the gate while stationary, while remaining in the running vehicle. This could be your family walking back from Home Depot with some stuff to put in the back or the no contact curbside grocery pick up, etc... the only way to do this is to try to get your hand in your pocket in the seated position (if you can) and fumble around for your key fob where you can then press and hold the tail gate release button. As I have been annoyed looking at blank button slots on the lower left dash, I decided to trace the signal wire from that tail light release button into the cab and before the relay. I isolated the correct harness and then toned the wire to confirm. I cleanly spliced a wire from behind the harness on just the one wire and ran it to the dash where I connected it to new matching switch I Purchased from Rave OffRoad. New Signal Wire to Switch, Ground to Body, 12V to Switch (This is for the LED only!) and Done! Works like a charm. Im 29 and Handicapped, the less I have to board and de-board the vehicle the better. Let me know what you guys think. If anyone wants to do the same thing I can post a guide /w pictures. Note: If you get a button from Rave OffRoad. Go with a Blank one and find a place that can laser engrave plastic. Have them put whatever you want on there, the light will shine through the engraving.

 

That's a cool mod!

 

I'm happy with this rack, I've been using it for the past four years on my 2nd gen. I will say it is much easier to attach to a 2nd gen than 3rd. Because of how the underside of the bed rail is designed I had to cut out part of the rib on the underside to make my old clamps work https://rackitinc.com/products/mega-clamps. Looking online I probably could have grabbed some different clamps that would have worked without modifying the bed rails, but I had these clamps powder coated to match the rack.

As for truck color, yeah I'm a fan, my wife told me I was boring since my last Tundra was the same color.

Regular, it's looking like I'll be going with an Icon lift and might also add bags and an onboard compressor to the rear to help when hauling.

 

Killer avatar!!!!! Up the irons baby !!!

 

Eddy forever!!!

 

Installed the ole Rek Gen Mud Flaps

 

Super cool mod - would love to see pics.
Also do you have pics of the wire or at least remember the color?

 

Can you show pics of the Headrest Grab Handles and the winch up front.

 

Yes definitely. I’ll go get some better pictures and post them here and also message you directly. Super easy once I tracked the wire. It goes right by the panel anyhow. All you need is any switch, I like the oem ones that fit right in, and one short 22 awg wire about 2 ft. Pictures coming soon.

 

Man thats good news that it is right behind the panel - will make it easy.
Definitely a useful mod and one I want to do.

 

I too would like this. So you didn't have to run a wire all the way up and you were able to just splice in near the cab and install the button?

 

New battery and wiring for my amps and some cleanup on my speaker install.

 

Added Diamondback’s lights to the underside of my bed cover one on the tailgate side and one on the cab side. Touchpads work well, and the lights have great coverage.