What have you done to your 2.5 gen Tundra today?

But you have a Blazing Blue, you can't get that color and they have nothing close in the 3rd gen. Keep keep keep!!!

Have you done any color matching on the interior? You can also paint the tow hooks blue. Since you have the color matched front bumper and center piece, it might not pop as much. On mine, the blue hooks were a nice pop of color against the black bumper. I also added blue lug covers to pop some blue on the wheels without it being too much and I was a fan.

Otherwise, the truck looks awesome!

 

Week late, but finally got my U748s installed.



I tried to measure the new ride height but I cannot for the life of me get consistent measuring points relative to the new angle of rake, but I believe the rear lift from stock is somewhere around 2.25 to 2.5. Gained about an inch and a half over the 1"block I had previously.

 

I always do center of hub to bottom of fender.

 

Same, but my post install measurements are throwing me off. I didn't touch the front, but it looks like I gained a few tenths in the front, more so on the drivers side than passenger. I'm coming from the stock Toyota Leaf packs with a 1" block, so I assumed that the increase in rake is changing the angle of the wheel well lines, throwing off my my reference point for measuring.

The only other explanation I can think of is that the Drivers Side lean was entirely due to the rear Leafs (especially considering I have the 38 gal tank). It does appear that the rear ride height is basically identical on both sides, so maybe that's it?

 

A 38gal tank can change some height depending on how much is in it.

 

I love the color of mine in the right light... so I took a picture

 

you gotta double cut to get all the dandelions down


Nice truck, always love seeing that color in person!

 

I'd say colormatch your mirror caps and door handles. Oh, and Blazing Blue Pearl is THE fastest color out there!

 

I took off the chrome for the black a while ago. IDK.

And 8T0 is always the fastest. Everyone knows, just afraid to admit. LOL

 

I like the black and blue, but that is why mine is black and blue

 

Installed deer. Not my favorite mod.

 

Oof... sucks but it could have been a lot worse. Time for a full front bumper when you get it fixed.

 

It looks way worse in person but it's still drivable so I can't complain. I'm kind of surprised airbags didn't go off, I hit it at probably 50. First thing I saw after impact was the entire Toyota badge flying slow motion across the other lane haha

 

That sucks out loud!

 

That sucks.

 

Welp, at least there's a silver lining now...time for some attractive and functional armor! Sorry this happened but think of the opportunities now...just happened a little before expected, right?

 

My first gen was a deer magnet.

 

Got my new Eibach rear shocks and RAS on today. At 10:00, when i started, I was telling myself, "You've never done anything like this before." By lunchtime, I was saying, "You got this!" Then I hit the rust bucket atop the drivers side OEM shock. An hour later, and the biggest pair of vice grips I had, I was back to "You got this!"
Used a skateboard to get my new-to-me Fuel Blitz rear wheels on. Pics to come once I get new tires mounted. Tomorrow, I tackle the front shocks. "You got this!"

 

Not really anything done to the truck specifically, but pops bought the boat he's been searching for for a very long time! Now it's time to sadly put the old one to rest as it just pooped out officially on the last day of summer last year 'Twas a sad day on Sunday bringing the old one from the lake to storage for the last time. Lot's of memories shared over the past 9 years. She will be missed!

On a better note, couldn't be more excited to start adding things to the truck and boat to make them even better!

When it comes to towing, any ideas to improve ride quality/handling are appreciated. Already have my eyes on the off brand TRD Pro rear sway bar from Amazon but am still looking for other ideas!

 

Build Phase 2 video is LIVE!

Just finished another round of modifications for my 2019 DC Tundra.

In this chapter we cover exhaust, suspension , wheels, and tires. The beginning of the video features the legendary @dirtydeeds
For those who don’t know, Keith is a toyota legend and he helped get my truck sounding incredible.

If you have any questions feel free to comment on the video or the Project Big Blue Build Thread

VIDEO LINK

https://youtu.be/n8mantcUJxE?si=zQA3iijQlNNGJ5to

 

Way better than the picture I took of mine today

 

I knew I should have taken a picture near the beach today lol.... That looks miserable bud.

 

It was a great day in the snow.

 

Well, I would level it, but I'm not sure if that counts as a lift.

 

ok, that changes my opinion... super funny story, I actually packed my mnt gear into the summer tote today. timing can be funny sometimes.

 

Wife ordered me a set of 5 @SCSPerformance Ray10s in bronze. So stoked. Now I have three sets of wheels and a smaller garage

 

The late model OE off-road wheels would look great w/your colors, and can usually be found for about $500 for a set in great condition...

 

Installed some trd pro led headlights with the @iHacker harness. I know it’s been said before but the light output is so much better! And really like the blacked housing.

 

Nice headlights and first gen Taco! That looks like a pretty well built rig