What have you done to your 2.5 gen Tundra today?

Just a heads up on this, the center console would not work for my wireless charger, after testing with these particular USB ports that have an on off switch. If you have something plugged in prior to turning the key on it will not power on. I found this one installed and tested last night and it works fine

BlueFire Upgraded Aluminum Alloy Quick Charge 3.0 USB Car Charger Socket & 2.4A USB Port IP66 Waterproof Dual USB Power Outlet with Voltmeter for Car Boat Marine Rv Motorcycle(Blue)

https://www.amazon.com/gp/product/B07MNM7F8S/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

 

Got new coilovers, wheels and tires

 

Far from plug and play... I've already swapped out the headunit for a Pioneer AVH-W4400NEX and added a sub/amp previously. I was able to reuse the door woofer wiring, though, so just had to run a new wire up to the dash location for the tweeters, which is a mild pain in the ass. I've got a wiring harness kit coming to clean up the amp bypass I did. I had to remove the stock amp because it has a low pass filter built into it, or so it seems.

Here's the part list:
Speakers: https://www.amazon.com/gp/product/B00ANI3LAK/ x2
Tweeter adapters:

$15 Speaker Adapters For Tweeters Fits Lexus, Fits Subaru, And - 1.25" cutout - SAK009_125-1 Pair

https://www.amazon.com/gp/product/B01BLMBHPW/
Front door speaker adapters:

$25 ASC Audio 6x9 to 6+-Inch 6" 6.5" Front Door Speaker Install Adapter Plates + Speaker Harness Combo - Compatible Vehicles and Restrictions Listed Below

https://www.amazon.com/gp/product/B06XB9XM7V/
Rear door speaker adapters:

$17 Metra 82-8148 6" to 6-3/4" Speaker Adapter for Select Toyota/Lexus/Scion 1998-Up Vehicles, Black

https://www.amazon.com/gp/product/B00IIC63P8/
Speaker wire adapters:

$19 (2) Pair of Metra 72-8104 Speaker Wire Adapters for Select Toyota Vehicles - 4 Total Adapters

https://www.amazon.com/gp/product/B01GEIP7RW/
Wiring harness for amp bypass: https://www.autoharnesshouse.com/41112.html

 

Lovin that look..

 

Awesome. Appreciate the guidance.

 

Thank you, with this I can at least start with the door speakers

 

Added the Intermittent Wipers stalk. Only one clip to disconnect now. Easy peezy.

Just as I finished that the FexEx truck pulled up with the new Ionx 5 premium Nerf Bars. Installed in an hour. Now the wife can climb aboard without pulling and straining.

 

Removed tonneau and drop in liner, cleaned the steel bed, sprayed with fluid film, installed weathertech underliner, reinstalled bed liner, installed swing case, reinstalled tonneau cover. Time consumer but easy and gives me piece of mind there is ZERO rust in the bed and it'll be good for many years to come.

 

added the color matched mirror caps from sparks parts. Pretty affordable and super easy mod! Gotta have more QS

 

Added these red 5.7 decals... not sure if I like them yet.

 

I love them!! Link? Just need to fill in the other letters in white maybe....

 

I like!

 

Why this instead of Line-X or other spray in bed line?

 

I don't have the money for a spray in liner. I would certainly love to have that done but can't justify the cost. I used about $5 worth of fluid film and came across that bed liner protector mat thing for cheap on craigslist, it came with the swing case.
I also really like the durability and strength of the plastic drop in liner. I have used it to haul firewood, gravel, bricks, mulch, my old honda ATC 3 wheeler and the usual bed for the truck stuff.
I justify my cheapness too lol. I don't use my bed too often but when I do I don't wanna worry about scratching, denting, chipping an expensive liner. I have the tonneau in a place 99% of the time and it stays very dry under there.
I was pleasantly surprised by the fact there was zero rust and minimal paint wear under the bed liner which has been in there for 5 years and 40k miles. A lot of that can probably be attributed to the fact the truck has always had a tonneau and has been garage kept.

 

With all the money you've spent Sean on detailing supplies you could have probably had four coats of LineX sprayed!!

BUT...without your reviews on said detailing supplies, we'd all be dealing with DPC BULL$h!T!! So thank you for the coin you've dropped for the community!!

 

Hahaha you're definitely right buddy.

 

I believe a 2019 limited . From CoolSpringstoyota. Theres a thread with a shipping discount. It still cost a shitload.

 

Thanks, I like the medium size flares too.

 

Added a Pop & Lock tailgate lock. Why dealers don't order this inexpensive upgrade on all trucks I'll never know. I sold the console safe, so I'm still in the green!

 

Removed tonneau cover. In preparation for four wheel camper next month. Unpluged rear camera . Tires rotated an a oil change. Montana her we come.

 

Having a kid really bites into my truck time. I have the following to install. Effin tons to do!

1. Baja Squadron Sport lights
2. Bilstein 6112/5100's
3. TRD PRO Wheels
4. 295/70/18 Falken AT3 Wildpeaks
4. Interior Lights
5. Raptor Style lighting...

 

You're headed to the best place on Earth!

 

Actually did this a while back but thought I would share. Added a Switch Pro and made my own mount for for a terminal bar and common busbar that mounts over the fuse box. Made it hinged with a threaded knob so I can get to the fuses easily. Also added an ARB compressor.

 

had to get the grab handle.Found a Tundra on CG being stripped.

 

CB +2 shackles, Bilstein 5160’s, and TRD pro headlights.

 

Small mod but this strap is comfortable asf...

 

Hit Upload File, choose file, then choose from pics or take pic

 

Thanks, Pinay!

 

I installed rear sway bar today with the help of a great you tube video.

 

Added some tow mirrors with smoked signals. And then a set of LED pods to replace the factory fog lights.