Ultimate OEM Toyota Parts Thread for 2nd gens (2007-21)

What is the easiest way to the shroud off the insert I tried to get the stock one off and broke 2 of the clips then jus gave up

 

Which 2 clips did you break? Was it the 2 at the lower corners, in the curve? If so, that's the 2 that normally break. Just start on one end and work your way around.

 

That one then one of the next two was the other I broke

 

Also what is the difference between attitude black and midnight black

 

I like that all black shift knob a lot

 

It has a nice feel to it too, i got it from eBay with a coupon, without that coupon I wouldn’t have been able to beat romans price. His are normally the best.

 

U have a pic of it installed? Might get it today

 

It matched the interior in my rcsb better so that’s where I have it.

 

Roman, I currently have a 2018 1794 in midnight black/attitude black. I'm wanting to switch out my grill to the platinum grill in this color and retain use of the tss sensor. Do I order a new grill with the emblem or can the emblem and sensor be switched out from one to the other? If possible can you send me a link to the exact grill I'm trying to find? Its difficult to ensure I'm purchasing the exact item I'm wanting. I would also like the hood bulge with it. Thanks

 

You would just need the grille and hood bulge in Attitude black listed in the first post. Everything will swap over.

 

Is something going on with your site, @Roman? It's showing $239 as the cheapest shipping for a color match pro grille, hood bulge, and a tail light for my Prius C to zip 80223. Was comparing your prices with another site that ships free.

 

I think the dimensions on the taillight were off. I've fixed it now. Also, you may want to order the grille using this link instead of the individual parts on their own:

https://parts.toyotaofcoolsprings.c...lle-w-hood-bulge-pro-grille-setup?parent=1001

Just select Inferno from the drop down menu, and don't forget the promo code in the OP.

 

Just received the color matched door handles.
https://parts.toyotaofcoolsprings.c...ssories-door-handles-door-handles?parent=1001

it came with 4 non-keyhole covers, and zero with a keyhole for the driver door? Is that what it is supposed to be and I need to order the keyhole seperate?

edit: correct one being sent out.

 

I think that might be a mistake. I recently purchased the same thing from @Roman and it came with the 3 non-Keyhole and one with the keyhole. It was great quality and fit perfect! Might have to PM Roman.

 

It should have came with one lock cover that has a key hole and three without the hole. PM me with your order #, and I'll get it squared away for you.

 

Hi guys, my first post here. I have a 2018 Tundra Limited. I'm wondering...if I want to change out my front end caps and my insert/bulge/surround (from chrome to black), is this something that should be done at the same time? Or can I simply remove the end caps and then tackle the grille area at a later time? If anyone has some insight it would be greatly appreciated, thanks in advance. And if anyone has a video link at their fingertips for doing both that would also be a great help. Thanks again!

 

Grille and hood bulge I recommend doing first as some have shown issues in the paint matching, and it could be down to new vs. sun damaged paint. They don't have to be done at the same time, I've had my grille and hood bulge out numerous times for different upgrades, I just try to do it on warmer days.

 

Thank you for the input blanger9!

 

Entered FORUM20 as promo code but it isn't changing my total. Is this still the active code?

 

Yes, however it is 20% off of shipping

 

Is there a link for this part?

 

I'm sure it's been asked but can't seem to find it. But any idea of when the 2018 Trd pro. Grill will be available? Any issues with the factory tss?

 

If your wanting to install the 2017 trd pro grille I have developed a bracket that will relocate your TSS. Also if your wanting to do a lift the relocation bracket will be adjustable

 

@Roman tire winch for 1997 Toyota T100 whole thing needed or can cable be replaced? The metal tab at end of cable broke off from the cable and bracket that holds tire

 

@Roman ther are 4 bolts that hold the tire winch 2 of which can be removed from underneath the other 2 the bed has to be removed, but by looking at it ther is a C clip on back side of winch and 2 small metal tabs at bottom, I'm sure you can't just sell those parts (the inside part)

 

2WD
https://parts.toyotaofcoolsprings.com/oem-parts/toyota-center-panel-554050c010c1

4WD
https://parts.toyotaofcoolsprings.com/oem-parts/toyota-center-panel-554050c020c1

Later this year. No exact date yet.

You can get the 4 bolts separately, but that's about it. The carrier is only sold as an assembly.

https://parts.toyotaofcoolsprings.com/oem-parts/toyota-spare-carrier-5190034010
https://parts.toyotaofcoolsprings.com/oem-parts/toyota-bolt-w-washer-9008011228 x4

 

Thanks @Roman

 

You have to remove the grill to get to the end caps (or at least i did), might as well do it all at once.

 

If your wanting to change out everything I would do it all at one time.

 

@Roman What is the P/N for the latest NAV/maps update? and is it region specific? Thank you