Tires rubbing

So what are you guys doing that are running 35s with a 6 inch lift about tires rubbing.

 

Be a bit more specific like where. But probably remove mud flaps, do a body mount chop, bumper spacer, trim and/or mold plastic with a knife and/or heat gun.....or buy smaller tires. lol

 

Lol know mud flaps are gone already ther hitting the plastic cover thought about trying to do the heat gun method

 

If it's the plastics behind the bumper, you can either get the shim kit from @Coachbuilder1 or redrill the bolt holes for the plastic and push that forward about .5 to .75 inch.

 

Ok nice was trying to avoid taking it out completely so I’ll have to try that

 

This is a good write-up - I didn't do the cutting, but he shows you where to re-drill the holes. https://www.tundras.com/threads/trimming-front-bumper-liner-and-mudflaps.63755/

 

Dremeled mine now I have access to the fog lights easier to. I would of tried the heat gun if I knew about it 5 years ago

 

Nice gonna try that if the heat gun doesn’t work but all in all I’ve only had the lift on for about 3 hours lol

 

you must have some weird offset wheels if your tires are rubbing with 35'' tires on a 6'' lift. I have maybe 2.5" lift and my 35's don't even come close to rubbing. I just had to remove the mud flaps and move the front fender liner forward like discussed above.

 

doesnt do it all the time but I think I’ll be fine when I move the liner forward some

 

Yea...I have to finish up trimming to fit mine, but I have a lil bigger than 35s, almost 13 wide, and -19 offset. Offset is what did me in the most

 

Not sure what my offset is but definitely gonna work on it tomorrow and get her dialed in