SOLD: FOX 2.5 coilovers w/out reservoir (883-02-021)

Updating my listing since everything else is sold. All that is left is a set of FOX 2.5 coilovers w/out reservoir (883-02-021), these are the 0-2" lift version and have 700lb springs

They were purchased from a fellow member a few years ago and were rebuilt and revalved to be around 20% stiffer than the factory settings by SDHQ. They have around 15k total on them. The shafts are in excellent shape and there are no leaks. The usual wear and tear is present and that includes scratches, scuffs, fading of anodizing, etc. All hardware is included. There is around 1/2" of threads showing on the coils. This should yield around 1" of lift, but if you are running a heavy bumper, expect less.

Looking for $650. I am located about 25 miles north of Chattanooga if you are looking to pick them up. I am wiling to ship, but it will be pricey since they weigh around 70 pounds w/out a box and packaging.

Pictures:

 

Good price

 

Out of curiosity, what ride / lift height are the coil overs giving at their current setting?

 

It really just depends on the truck, but on average I would say around an 1" of lift.

 

1" over stock height?

 

Correct. I did run these around 1.5" of thread showing at one time and it gave roughly 2.5-3" in lift. I wouldn't go past that as you may get coil bind. Keep in mind, the more you crank them, the stiffer the ride.

 

I have these same coilovers. I have them with the least amount of threads showing as possible and im at 3.5" of lift. No aftermarket front bumper. Maybe you have an aftermarket steel front bumper and/or maybe the 20% stiffness reduction gives your coilovers those results. It's just surprising you could get the lift that low, especially with that many threads showing.

 

I'll have to see if I can find the before measurements, but these are the 0-2" version. Are you running the extended travel ones? I now am running the ones with the DSC adjusters now and have similar lift as yours with very minimal thread showing.

 

Ah, this makes sense now that they are the 0-2" version. My apologies, i missed that bit of information. I wish i had gotten that version to begin with as the 0-3" is very misleading as the minimum lift is really ~3.5". Sorry for clogging up your for sale post. Good luck with the sale.

 

bump

 

Feel free to make offers, worst I can say is no.

 

I would have trade you my 0-3" for your 0-2". Bummer for me that you already got the 0-3".

 

Man, where were you about 3 years ago that would have been awesome haha.

 

PMing you

 

bump...rear shocks and shaft guards have been sold.

 

bump

 

bump

 

....

 

price drop

 

....

 

How much for the shackles I am in Nh? Thank you

 

DM'ed you.

 

shackles have been sold

 

lowered prices bump

 

Interested in shims and bolts dm me
Price shipped to 92154 thanks

 

Sent you a dm.

 

Might be too new to PM me... But interested in all 4 CB shims with shipping to 97218.

 

Shims and bolts sold.

 

....

 

pending sale