*SOLD* Coachbuilder Shackles & Shims

I've got two separate sets of shackles for sale, made by David at Coachbuilder. Also up for sale are a set of Coachbuilder shims. These will either correct lean in your suspension or can be used to give a half inch lift in the front. I had 3 sets of shackles before finally settling on his +2s for my custom Alcan leaf pack.

Here we go.

+3 shackles: SOLD

This equates to a 1.75" lift in the rear. These are his first design, solid steel and powder coated. They come with new poly bushings and the original bolts, nuts and washers. I'll also include a carrier bearing drop kit to avoid drive line vibration. Dialectic grease included.




+1 shackles: SOLD

This equates to .625" lift in the rear. These are his second design and are aluminum. The come with new poly bushings also, but you will need to get some dialectic grease. They will also come with the original bolts, nuts and washers.




2 Coachbuilder shims: SOLD

I had one on each side of my '13 before I bought my Elka coilovers. The are .25 inches thick and one shim adds .5 inches of lift. Some use just one on the driver's side to correct lean or like I did, adding a half inch lift to both sides.



I've been parts hoarding for a few years now. So I'll probably have more up for sale soon. If I can part with things. My prices are firm. Thanks!

 

ill take the front shims...trying to figure out how to send PM...77063 @TruckyTruck

 

Go to top of the page Inbox and click on start new conversation and search for his name. Hope that helps!

 

Got it! Thank you!

 

Shims are sold.

 

I’ll take those +1’s, PM sent. Thanks.

 

+1s are sold

 

I’ll take the +3

 

Ok, I'll message you

 

+3s pending

 

+3s sold.

Thanks to the guys that purchased these. 2 out of the three packages were shipped yesterday. And I'll be sending out the +3s by Thursday.

Message me if you need any help with getting them installed. After replacing my entire suspension twice and trying on shackles like a lady tries on shoes, I've got a little experience.

Also I have a few other stock tundra parts that I've had sitting in my attic for the last 6 years. I'll probably be placing those up for sale next.