rock warrior wheels

I have a 2019 CM Tundra With a 6112 Billstein Front struts set at 1.9 (3rd clip) i also added JBA uca's when i had the front end done.
I recently found a set of rock Warrior wheels that I want to install on the truck and was wondering what was the biggest tire that I can put on It without having to Do a cab mount chop or run wheel spacers.
I also installed a TRD pro front skid plate.

 

Im in the exact same boat, I have a 2013 with the same 6112s and I have SPC UCAs, but I do have a cab mount chop already done.

I currenlty have 35s on methods with a +18 offset

was thinking of going 37s but might just stick to 35s with my new rock warriors

Wish I could give you advice but watching this thread for the same help

 

RW’s are 17x8.5 with a 50mm offset. Other stock tundra wheels are 60mm offset (the 18” ones). Your rock warriors will sit out from the centerline of the vehicle another ⅜” or so than those aforementioned stock wheels.

Tons of guys on this forum are running “stock wheels” (TRD pro, TRD off-road) with 285/75r18 tires while sitting at 2” of lift (level) up front without issues of rubbing or trimming etc. many just remove the front spat (the useless forward mudflap). That LT tire size is colloquially referred to as a “skinny 35” as its dimensions are 34.8 diameter by 11.2 width. Different tire manufacturers have slight variations in these dimensions while still being considered that nominal size. So anywhere from 34.5”-35” x 11.2”-11.5”.

I would search the “35 x 11.5-17” size to get you started and you’ll probably be pretty close