1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Rear wheel bearing

Discussion in '2nd Gen Tundras (2007-2013)' started by navybmc12, Sep 17, 2019.

  1. Sep 17, 2019 at 11:49 AM
    #1
    navybmc12

    navybmc12 [OP] New Member

    Joined:
    Sep 16, 2019
    Member:
    #36225
    Messages:
    2
    Gender:
    Male
    After hearing a loud humming noise I inspected the rear tire see no issues. The mechanic says most likely it is the rear passenger wheel bearing. Any recommendations on an aftermarket brand. Paying $300 for OEM seems too much for me.
    2008 TRD 2WD SR5 97,000 miles.
     
    08crewmax likes this.
  2. Sep 18, 2019 at 8:21 PM
    #2
    TrdLtd26

    TrdLtd26 New Member

    Joined:
    Aug 1, 2019
    Member:
    #34014
    Messages:
    80
    Gender:
    Male
    I would get something like that from the dealer.

    But if you must, autozone should be fine
     
  3. Sep 20, 2019 at 12:13 PM
    #3
    triharder

    triharder Sorry, Not Sorry

    Joined:
    Sep 19, 2017
    Member:
    #9745
    Messages:
    218
    Gender:
    Male
    First Name:
    Jake
    Southern, Maine
    Vehicle:
    2010 RWB Black
    Billstein 6112/5160's, coachbuilder spacer on driver side/ 20" rockstar wheels/ 33" nitto ridge grappers/SS Brake lines (or as most people write Break), Painted Calipers/Powercoated Tow hooks/pocket flairs/heated seats,bed leds/line-x liner/xtang trifold/tow mirrors/Stereo Work/Compustar Remote Starter/ retrofit Morimoto Minin H1 and switch back LEDs/ plenty I'm forgetting
    I just put a wheel bearing hub assembly on my wife's Venza. it was $391 OEM from toyota. $215 from Advance auto. However, if you bought the MOOG bearing (3 year warranty) from advance Auto online and picked up in store you saved 25% (50 bucks) after giving them your email address.

    Out the door for $160 as i bought in NH with No sales tax.

    Moog is respected for bearings. and 3 year warranty (the job is overall easy) is the best warranty i've seen. (lesson learned to remove wheel hub nut before removing rotor/brake assembly) again i'm generalizing as i haven't done this on the truck only the car).

    I'm assuming the hub assembly for the truck is similar to the car for price comparision.

    Good luck.

    (Oh, and if you take wide sweeping turns with the truck (empy parking lot etc) and the noise (loading and unloading that wheel) changes its a wheel bearing. lifting the truck up in the air (wheels) and trying to feel for play (horz/vert and corner to corner) could be a wheel bearing also. Her car only made noise over 40 mph and i think i have a bad tire (after balancing and alignment) i still get the thumping noise in her car. But, that one wheel had play when it was off the ground.

    You could rotate the tires and see if the noise follows the tire (that might rule out the bearing as well)
     
    Last edited: Sep 20, 2019
    Wiscdave likes this.
  4. Sep 21, 2019 at 2:03 PM
    #4
    Dr_Al

    Dr_Al New Member

    Joined:
    Oct 10, 2018
    Member:
    #20385
    Messages:
    608
    Gender:
    Male
    First Name:
    Al
    A rear wheel bearing is not something I would do without a hydraulic press. Without one you are pretty much dependent on what your mechanic wants to do. I would use a name brand aftermarket bearing. Chances are you can get just the bearing or the bearing and hub assembly. I'm guessing the $300 is the assembly. It's not like Toyota makes it's own bearings.
     

Products Discussed in

To Top