1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Front Sway Bar Bushing Size?

Discussion in '2nd Gen Tundras (2007-2013)' started by Tix, Mar 28, 2025.

  1. Mar 28, 2025 at 6:35 PM
    #1
    Tix

    Tix [OP] New Member

    Joined:
    Nov 20, 2021
    Member:
    #70845
    Messages:
    15
    Gender:
    Male
    First Name:
    Jeff
    Vehicle:
    '10 SR5 4X4
    Too many to list.
    Hi all,

    I snapped a bolt that holds the stock 2010 Front swaybar to the inside-frame. Idk how I managed that.

    While extracting the bolt & nut, I found the bushings were worn. Attempts to replace with new greasable polyurethane bushings hit a snag.

    Reading online, I thought the swaybar was 1 1/16" in diameter. But the bushings I received are far too small and fail to go completely around the bar. Even the bolt holes on the bushings mounts are too small for the stock bolts.

    Does anyone know the correct swaybar diameter?

    Thanks!
     

Products Discussed in

To Top