Front Camera Mounting on TRD Pro Grille WITH RAPTOR LIGHTS

I ordered an Anytime Back Up Cam kit and I am trying to determine the best placement for the camera. If you have a front cam and a TRD pro grille, what do you recommend?

• Height?
• Vertical/Horizontal?
• Buy/Fab Bracket?

Any other general tips or recs are appreciated!

 

I'd start with this thread...
https://www.tundras.com/threads/2014-2021-front-rear-anytime-camera-mod-frac-harness.13633/
lots of good info in there

Height, I'd match the height as close to the height of the rear camera.
I'd definitely mount it horizontal.
As for the bracket, you could drill into the grill if you'd like or buy/make your own. Here is one I've seen... https://yotaleds.com/collections/tundra/products/tundra-trd-pro-grille-bracket and if I'm not mistaken there may be some 3D printed options linked in the thread above.

 

I used the yotaLED bracket with some modifications and a 3D printed shim

Mount details are in the middle of this post
https://www.tundras.com/threads/rainmans-2021-lunar-rock-trd-pro-build.77317/page-7#post-2061039

 

Thanks bro!

I just realized that one of my raptor lights fill the middle void where the YotaLED plate is designed to go. I'm going to see if maybe I can figure out a way to piggy back off the mount for the RL. Now that I think about it, if I mount it above, the light will likely interfere with the picture as well...


I may have to relent and drill into my grille, but I really want to avoid that.