evo one remote start programming problem. helppp...

hi guys
i just wired my 2015 tundra with the evo one toy 2 from crutchfield. but could not get it to work. i have flashed the unit already and check the wiring many time. i could not get the key by pass programming to work. so frustrated.
step 1 was to hold the prog buttom and connect the six pins main conn. to the unit. it supposed to flash solid blue and red. my kept on flashing red yellow and blue alternately.
anyone have the same issue? hellppppp

 

They didn't turn solid for me either. You have to observe it's pattern and let go when the red and blue are lit at the same time. I did the same thing waiting for the red and blue to steady and they never did, so I just let go once red and blue we're lit and it worked no problem.

 

let me try, been messing with it all afternoon. thanks for the tip

 

You bet

 

do you do that with the key in the ignition?

 

Nope. You don't put the key in the ignition until step 5.

 

Is it properly flashed? Don’t know if Crutchfield flashes their units.

 

hallelujah you have save my day, it worked thank you very much and good nite sir. =)

 

Welcome.