Drive Monitor Switch Mod Parts Available

Sorry for posting this here but our account isn't of legal classifieds age yet!

Hello to any who may be looking to do the drive monitor switch (MPG buttons) mod. We recently completed this upgrade and have some additional parts that may be of use to anyone looking to do the same. I have the following items for sale:

- Wire, Instrument Panel, No. 3 (821430C030) this is the harness that plugs into any switches (4wd, hazard flashers, mirror adjuster etc.) you may have on the Driver's side dash including the drive monitor switch. This harness is fully pinned (all 8 wires) at the drive monitor switch plug down to the JL1 connector: $50 including shipping

- Assorted factory wire colors/lengths with factory crimped on pins that fit Toyota connector 12372 (JL1) that will need to be spliced to the correct wires in J28: $10 for 2 wires including shipping

- Assorted factory wire colors/lengths with factory crimped on pins that fit Toyota connector 12557 (J28) that will need to be spliced to the correct wires in JL1: $10 for 2 wires including shipping

- Assorted factory wire colors/lengths with bare ends for those that want to "stuff" the connectors: $6 including shipping

- 1 factory wire with factory crimped on pins that fit Toyota connector 12372 (JL1) and 12557 (J28) The "holy grail" wire for this mod!: $10 including shipping


As someone who has done this mod unfortunately twice (once including replacing the entire JL1 and J28 connectors) the above items will make life much, much easier!


Good luck and let us know if you have any questions!


AlumBody Team