CrewMax interior Wiring Run, Mirror to Bed

Has anyone had success in running wiring from the cab to the bed.

I already asked Toyota if there'd be issues disconnecting the mirror and they said no.
I'm going to be installing a rear view mirror camera/screen that will run to 2 points.

1st to the bed light and the 2nd run to through the bed to the rear and up onto the camper shell, a Smartcap.

The cap blocks 80% of my vision for the rear and as i'll be backing to lower a jet ski plus
safety I want to be able to see behind me.

The only roadblocks are my lack of how to run from the mirror through the roof to one
of the back pillars where I do know how to access that are from when I installed the new
seat brackets for the rifle locker.

Thanks for any input that might help.

R

 

when I installed my rear view camera. I ran along the frame underneath the car from the tailgate to passenger side. From there, there is a gromet that will take you underneath passenger feet From there, you run wherever you want inside cab use wiring loom to protect wire underneath truck.
Have fun !

 

Ok WOW !! thanks !
I'm trying to tackle it Monday before I hit the road Wednesday so this is awesome info !!!
Thanks !!!

 

Plumb your wire across the front of the headliner down the A pillar, down the kick panel, under the carpet/pad, and out the body plug of either your driver or passenger side.