1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Clicking tapping noise coming from behind glovebox

Discussion in 'Sequoia 1st Gen (2001-2007)' started by Somervre, Aug 25, 2025 at 10:24 PM.

  1. Aug 25, 2025 at 10:24 PM
    #1
    Somervre

    Somervre [OP] New Member

    Joined:
    Monday
    Member:
    #139851
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2005 Sequoia SR5
    I’ve kinda had this problem before. Same intermittent noise from the rear was a blend door actuator that I replaced. Now I have same noise coming from behind the glovebox. Problem is I can’t locate exactly what part it is. I think it might be the damper on the blower assembly. But how the heck am I supposed to be able to get to it? Do I have to remove the entire blower assembly? I’m trying to do that but there is one screw at the top that comes in from “the other side”. I thought maybe from a bolt from inside the engine compartment but no dice there. Info on the internet seems non existent other than some other actuators that are mounted more towards the center. That’s not the culprit. Any advise greatly appreciated
     
To Top