Another Tire Size Question

Hopefully this will be my last question and I do appreciate all the help I'm getting here. I'm installing Bilsein 6112 and 5100's and I'm looking at the Falken WILDPEAK A/T3W 295/70-18 tires (34.3" H and 11" W). Other than mud flap mods are there any other problems I need to be aware of?

 

What setting are you planning on for the 6112's ? I have them on the top setting , 2 driver side shims, 1 on the passenger side and put on Cooper Discover AT3 - 295/70/18. My wheels are 18x9 with +25 offset. I added the Boss bumper space which pushes the bumper forward a half inch. All I had to do was remove the small front mud flap.

 

When I added my 295/70’s, I removed front and rear mudflaps (front axle) thinking it’d rub primarily on the rear. Turns out, the tires only rub the front and only on one side at full lock in reverse. I pushed the front wheel well liner forward, but it still rubs a little.

 

Wheel offset is a key factor. what wheels are you running?

 

Stock rims.

 

I'd like to have them set to the highest setting. How do you like the way your truck rides on the top setting?

 

BTW, do I need to do anything with the TPMS's?

 

So far I like the way it rides, I don't do any real off road driving..so they don't really get put to the test much.

 

Just a little skid plate trimming possibly...that’s it.