6112/5160 top setting w/ canopy - leveled?

Hello all,

I did try searching high and low and couldn't find what I was looking for.

Currently have a Toytec 1" spacer lift up front/1.5" block in rear. I purchased the truck with this setup and I don't know if there's additional spacers up front or not. It rides like crap and I'm ready for a change, it has an ARE canopy with the rear fiberglass door. With nothing in the bed, measurements are as follows with the truck on even ground in the shop

Front hub to bottom of flare - 22 3/4 (21 3/4 with 1" spacer removed?)
Rear hub to bottom of flare - 25 3/8 (23 7/8 with 1.5" block removed?)

I just ordered the 6112/5160 combo at top setting and want the truck leveled, although I'd be fine with minimal rake. I will be getting rid of the spacers/blocks of course.

Appreciate your help

 

I just installed 6112s set at 1.9” with one Boss shim on drivers side, stock rear with a Leer 100XR shell. I was hoping for level but it looks like I will have to get the 1.5” leaf pack to lift the rear and I will add 5160s at that time, c’mon Santa!

 

top setting will leave you nose high. You’ll need at least some lift shackles in the rear. 3rd setting on 6112s levels you.