1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

3rd Gen actual sidewall OEM vs 275/65/20

Discussion in 'Wheels & Tires' started by sandiegosteve, May 12, 2025 at 4:52 PM.

  1. May 12, 2025 at 4:52 PM
    #1
    sandiegosteve

    sandiegosteve [OP] New Member

    Joined:
    Sep 30, 2023
    Member:
    #104695
    Messages:
    137
    Gender:
    Male
    First Name:
    Steve
    San Diego
    Vehicle:
    24 Limited TDR Lunar Rock
    I am stuck in analysis paralysis. I want more sidewall without a ton more total weight.

    I have the stock TRD 20" 265/60's. No lift, stock TRD Limited.

    Theoretically, they have 6.26" of sidewall and are 32.5". I want more sidewall for local trails to give some air down potential. Going down to an 18 is high on wish list, but I need wheels and tires.

    I can get a 34" with 275/65/20 with 7" sidewall or 33" with 275/70/18 with 7.6" sidewall. Going to18's nearly doubles cost for about a half inch of sidewall.

    So I measured my 265/60/20's and they look closer to 31" and 5 1/4" sidewall measured at top. 5 -> 7" of sidewall staying on 20's seems better all of a sudden; just 4 tires.

    Can anyone else with OEM faulkens measure and see if theirs are similar?

    Anyone with 275/65/20's have a moment for a similar measure of sidewall?


    (Apologize for typeos, on a bumpy flight)
     

Products Discussed in

To Top