285/65/20's On Stock TSS wheels

I have been researching and researching to see if 285/65's would fit on stock TSS wheels. I ran across a deal too good to pass up on a new set of Falken Wildpeak AT3's local so I pulled the trigger on them. I ran that tire on my Tacoma and loved it. Now to get my lift ordered so I can get them mounted. Attached are some pics of size comparison between the stock 275/55 Duratracs and the Wildpeaks. For those that have not been around the Wildpeaks, pictures do not do the tires any justice on the tread.

 

yes, they clear the stock control arm by 7/8". You will need to remove the front spats and if you have the stock skid plate, you will need to bend it up a bit for clearance at full lock. These are BFG KO2s at 11.5" x 34.6"

 

Your truck was the reason I was looking at 285/65's. Not much out there in regards to fitmant on stock TSS wheels.

 

Well, actually this is pretty comprehensive if you read the notes on mods, the problem is that the search feature sucks without specifics.
https://www.tundras.com/threads/largest-tire-you-can-run-stock-for-all-generations.9762/