1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2024 Tundra Limited Rubbing Issues with Factory 3” Lift

Discussion in 'Wheels & Tires' started by kimhyo93, Oct 16, 2024.

  1. Oct 16, 2024 at 8:40 PM
    #1
    kimhyo93

    kimhyo93 [OP] New Member

    Joined:
    Oct 5, 2024
    Member:
    #123835
    Messages:
    2
    Gender:
    Male
    First Name:
    Jin
    Vehicle:
    2024 Tundra Limited TRD w/ 3” Lift
    Hello all!

    I just got a 2024 Tundra Limited with TRD off-road and factory 3” lift. The dealer installed 35s (295x65x20, Toyo Open Country R/T Trail) on the 20” TRD wheels and I had to get 1.25” (-31.75mm) spacers from Spidertrax due to inner sway bar rubbing, however, still rub in the inner anti sway bars. Any advice all?

    I am thinking of doing Method 305 NV 18s with either 0 or +18 offset wheels.

    However, doing the math, the TRD wheels are +50 offset and with the 1.25 inch (-31.75mm) spacers, it should be around +18.25 offset but still rub.

    Thanks all for your insight. Just to make sure, I also did an alignment check + air PSI is also at 40.

    image_0.jpg
    IMG_2641.jpg

    IMG_2703.jpg
     
    j-utah likes this.

Products Discussed in

To Top