2023 Tundra Platinum 26k mil issues.

Hello everyone, newbie here from Miami, Florida
Has anyone experienced any issues with the 23' platinum? I have been facing the following problems:
1. The front brakes have been making a loud friction noise. I haven't found a solution to this yet.
2. The underside air dam broke and couldn't be retrieved. However, the dealer has replaced the actuator.
3. The front passenger side window was making a noise while moving and eventually slipped down and didn't come back up. The dealer has replaced the parts.
4. The front driver's side window also had a similar issue today. The dealer is waiting on replacement parts and will fix it tomorrow.
5. Finally, the on/off and volume buttons on the radio have broken.

Has anyone with a 22' or 23' Tundras experienced similar issues? Thank you.

 

Welcome to the forum . The only thing I haven’t read about on here is the air dam .

 

I haven't got this problem yet 20k miles same vehicle. My break do squeaks sometimes past summer and fall but not enough so I didn't report it yet.

 

I wanted to share an update from my visit to the car dealer today. They replaced the radio button knob, which is great. However, they also informed me that I need to return tomorrow because they didn't realize that the driver-side window has a linkage wire that needs to be replaced in addition to the broken window motor assembly. I was a bit surprised because they took about 4 hours yesterday trying to find the defective window hardware but didn't notice the bad cable. So, unfortunately, this will be my third visit to the dealer this week. At present, the window on the driver's side is being held up with some white tape.
It's worth noting that the brake pads only produce a loud squeaking noise when gently pressed, but not as much when force is applied or when they are hot from use.

 

Brakes need to be greased. Have them pull the pads and do it.

 

Follow up, I went to the dealer today as planned to have the window cable installed, they replaced it under warranty. However, I am a little concerned that they may have used the same part that originally came with the truck, which could potentially fall apart in a year or so. I am not sure if the replacement part is the same part number as the one that came from the factory, or if it is a newer version. The dealer did not mention any updates, except for the part numbers:
85720-0C070 Motor Assy, Power kit.
69802-0C041 Regulator Sub-Assy.
Does anyone else have experienced the same issues?