2021 nightshade HELP

Hello all,
I'm having the hardest time figuring out what tires I can switch to on my 2021 tundra nightshade. I have stock on now and DO NOT want to switch the 20" rims. Whats a great tire that looks way more toothy than the stock tire on now. I was thinking
BRIDGESTONE DUELER A/T REVO 3, but I dont know if these will even fit without a leveling kit or raising. I'm trying to do this without any additional costs, other than the tires themselves! Thank you.

 

BFG KO2, Cooper STT Pro, Ridge Grapplers, Wildpeaks......there are quite a few.

 

thank you, which size can fit without a lift or leveling kit. Sorry, i'm a rookie.

 

That question is pretty complicated to answer in black and white terms. You can fit even 37 inch tires without a lift, but you would have to trim alot. comfortably you can fit 285/70 bone stock. Depends what you are willing to do to the truck. Spacers, new wheels will both have significant effects on this question.

 

285/70/18 fits on stock suspension with stock wheels. Few tires available in that size. 275/70-18 is a nice size on a stock tundra and plenty of tires available in that size.

Here is what is available in that size at DT- https://www.discounttire.com/fitmentresult/tires/size/275-70-18

This is how 275/70-18 look

 

ok great. Thank you. have 20in stock rims. Wondering if i'll need spacers. Not really looking to get a lift. Just really need to make my tires look more toothy and rugged.
Thank you.

 

If you want to keep your 20s you can, just need to keep tire size in the 33inch range, 11-11.5 wide and you will be good to go.

 

I put on Ridge Grapplers. I like the look. These are 285/60/20.

 

Ok WOW!...those are exactly what i'd like to have!I have the same rims. Did you do anything else? Spacers, lift...etc. Sorry im a rookie here. I just dont want it to rub.

 

BFG KO2's, 275/65/R20. No lifts, no mods, stock rims, no rub. Stock size is 275/55/R20, increased diameter only but might be able to go wider with 285's. You can have tire discounters or discount tire check fitment for rubbing prior to deciding.

 

I do have a lift on it. More of a level right now. They are Eibach 2.0 Coilovers. Stock back for now. Spidertrax spacers are on it as well, but when I was researching on here, there were a few running the 285 with no lift or spacers. So I think for you it can be done. May need to remove the small flap in front. Let me know if you need anything else.

 

Those do look good with the wheels, how do they ride and how much road noise do you get?

 

Thank you. Really appreciate it. They ride great. PSI is at 45. Road noise is very minimal. Slight increase from stock. Very happy with them so far.