2014 SR5 tundra

Thoughts for this problem? ABS, traction control lights on, 4hi 4 lo lights blinking
Drive for 5 minutes turn engine off and restart all lights off and don’t comeback on.
Start in the morning and lights are back on? Truck runs perfect with light on.

 

Hit your shop or auto parts store and have them check for engine codes if issues continue.

But first, when was the last time you changed the battery? Weak battery will cause all sorts of alerts and issues so it could be your battery going out. If it is older than 3 years, may need replacing. At least have it load tested. If it is good, then have someone scan the truck for any fault codes.

 

Battery less than one year old. I have a code reader no codes

 

check your ABS system- sensor could be out or wires broken, chewed.

and using the search feature here will find you lots of info when you need it. There are many threads with info on similar issues. I past a couple below- i just searched "ABS, traction control lights on, 4hi 4 lo lights blinking"

https://www.tundras.com/threads/bra...ing-traction-control-and-abs-lights-on.66248/

https://www.tundras.com/threads/4lo-4hi-flashing-abs-traction-full-on.75999/

https://www.tundras.com/threads/abs...hi-4lo-flashing-trac-and-abs-solid-on.103314/

 

Put some real battery cables/connectors on it...stock ones are cheap crap IMO. Clean all connections well & put a light coat of grease over them.

 

I will try