1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2013 rear hub question

Discussion in '2nd Gen Tundras (2007-2013)' started by green13tundra, Sep 21, 2020.

  1. Sep 21, 2020 at 11:26 AM
    #1
    green13tundra

    green13tundra [OP] New Member

    Joined:
    Sep 21, 2020
    Member:
    #52556
    Messages:
    6
    Gender:
    Male
    First Name:
    Collin
    Vehicle:
    2017 Trd Pro
    Hello! So recently I bought a 13 crew max. Guy was having a problem with a right rear abs sensor code. He had both bearings and both axle seals replaced. Code was still in. I bought it right after and I’m process of trouble shooting. Both sensors are coated again in gear oil. I’m wondering if it was overfilled or breather was plugged. I pulled both axles today and before I replace things and put it back together I wanted to know what does the speed sensor pick up off of? I was expecting a tone ring of some sort. It is smooth like the bearing retainer. I want to make sure something is not missing before putting back together. Thanks
     

Products Discussed in

To Top