2012 Toyota Tundra CrewMax 4x4 Platinum

I tried to replace the power seat switch on the driver side because the recline button was broken. Prior to removing the broken switch I could still adjust the seat front and back up and down just no recline. The replacement switch I received had only ONE plug... the switch in the truck from factory has TWO plugs. One bigger main plug and a smaller plug right next to the big plug. I tried plugging in the new switch with only the one big plug because the big plug was the same. No surprise it did not work. So I plugged in the original switch so I could at least move the seat forward and backward until I can buy the correct switch. Problem is now the seat won't move at all. Now I have nothing and the seat is all the way up. I am going to a dealer for the correct part but will I have to reset something or disconnect the battery to reset the seat to work again. Any suggestions would be much appreciated.. thanks