1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2012 suspension help?

Discussion in 'Suspension' started by pratt_electric, Feb 13, 2021.

  1. Feb 13, 2021 at 5:26 PM
    #1
    pratt_electric

    pratt_electric [OP] New Member

    Joined:
    Feb 13, 2021
    Member:
    #59077
    Messages:
    2
    Gender:
    Male
    First Name:
    Jeremy
    5.5" Zone Lift, 35x12.5
    Hey all, New Member, long time Toyota enthusiast

    I have a 2012 Tundra SR5 with 58K. The truck has a zone 5.5" lift (strut extenders) with 35/12.5/20.

    I could really use some guidance here on a couple things.

    My truck does this annoying popping noise, full lock in either direction. It started doing it not long after the lift was installed (not by me). The CV's are new, I'm really stumped at what could be causing it. Everything seems to be tight. The lift has less than 10k on it.

    I would like to upgrade the suspension further, especially in the front of the truck. Improve ride quality some if possible. Any recommendations on a direction I could go?

    Any advice greatly appreciated.
     

Products Discussed in

To Top