2011 tundra 5.7 ignition sticks and no fuel

Have a 2011 tundra 5.7 crewmax , went to the store got home , everything was good , next morning would not start , cranks and cranks , it started sticking when you turn it over, checked fuses are good relay replaced tried a new fuel pump but I’m not getting power to the pump I sure could use some help maybe the fuel control module , but I hate to just buy another part and that not be it

 

How old is the battery? Are the battery connections nice and clean? and tight?

 

Battery is about a year old and terminals are clean and tight

 

Does it do this with all the keys you have?

 

I only have one key , guess I can go get another one made and try a new key

 

I would definitely try a second key. Something as simple as the security chip getting flaky could cause this. A failing fuel pump control module could as well, and used modules aren't all that expensive to try.

Beyond that you'd want to get a scan tool on there to see what's missing for the truck to start.

 

When I put my key in the immobilizer symbol goes off , wouldn’t that stay one of key was bad?

 

I checked all relays , and looked at a lot of wiring today I cant find anything , the a/t oil temp and check engine light are the only lights on when I try to start it, I just figured they go off if it would start, guess it’s about time to drag it to a shop